Gate Repair Cost in Fort Worth - What It Actually Costs, Quoted Free

Wrought iron

Wood & steel frame

Farm & ranch

Sliding driveway gates

LiftMaster operators

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Explore

Styles & brands we work with

01Wrought iron02Wood & steel frame03Farm & ranch04Sliding driveway gates05LiftMaster operators

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

How Much Does Gate Repair Cost in Fort Worth?

Gate repair in Fort Worth typically runs between $150 and $650 for most standard fixes, with the average job landing around $275 to $400. Electric gate repairs cost more, usually $350 to $1,200 depending on the opener, board, or sensor involved. At Latch and Post, you’ll see a written price before any work starts when you choose our Gate Repair services, so the number you’re quoted is the number you pay.

Key Takeaways:

• Standard mechanical gate repair (latches, hinges, posts): $150 – $650
• Electric gate and opener repair: $350 – $1,200
• Full gate replacement in Fort Worth: $1,800 – $6,500 installed
• Emergency or after-hours service may add $75 – $150 to the base rate
• Latch and Post provides a written price before work begins, every single visit

Gate Repair Cost Breakdown (2026)

Here’s what we’re actually seeing across Fort Worth neighborhoods like Wedgwood, Arlington Heights, Tanglewood, and the Ryan Place historic district in 2026. These are real working numbers from the field, not national averages you’ll find on a generic cost website.

These ranges reflect what families in Fort Worth are paying in 2026. The spread exists because a gate latch on a 40-year-old wrought iron gate in Arlington Heights is a different job than a latch on a five-year-old aluminum gate in Mira Vista. What changes the number most is condition and access, not square footage of the property.

One thing worth stating plainly: if a quote seems suspiciously low, ask what’s included. A $49 gate repair special usually means a service call fee with the repair priced separately once someone arrives. Latch and Post does not work that way. We hand you a written price before we touch a single bolt, and that’s the end of it.

What Affects Gate Repair Pricing in Fort Worth

• Gate material and weight. Wrought iron and steel gates weigh far more than aluminum or vinyl. A sagging wrought iron gate in the Fairmount district often needs reinforcement plates and heavier hardware, which adds $80 to $200 to a hinge job.
• Post condition and soil shift. Fort Worth sits on expansive clay soil that swells when wet and cracks when dry. This movement is the single biggest reason wooden fence posts lean and gate posts pull out of plumb. We regularly see gate posts in Wedgwood and TCU-area homes that have drifted two or three inches out of level over a few dry summers. Resetting a post in this soil sometimes means deeper footings than the original pour.
• Electric opener brand and age. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule all have different board costs and programming quirks. A DoorKing board replacement is not the same price as a Ghost Controls board replacement. Older units sometimes need a full retrofit rather than a component swap.
• Access and clearance. Gates on narrow side yards, gates blocked by landscaping, or gates set close to a brick wall take longer to work on. A simple latch replacement on a gate with no swing clearance can take twice as long as one with open access around the post.
• Time of day or week. Nights, weekends, and holidays carry an emergency rate in most of the Fort Worth market, typically $75 to $150 above the standard price. Latch and Post answers calls with a live person 24/7, and we’ll tell you the after-hours rate before we dispatch, so you can decide with the number in hand.
• Whether the gate is the primary entry point. If your gate is the main way in and out, the repair is a different priority than a decorative side gate. It’s not about urgency for urgency’s sake, it’s about matching the fix to how hard that gate works every day.

Step-by-Step: What to Expect When You Call Latch and Post in Fort Worth

1. You call (682) 841-5749 and a live person picks up. Not a voicemail tree, not a callback queue. A human being answers, day or night, weekends and holidays included. Tell us what the gate is doing (or not doing).
2. We schedule a visit around your life. Kids napping at 2 p.m.? We can come at 10. Dogs that lose their minds at a doorbell? We’ll knock gently and wait. We schedule appointments, not arrival windows.
3. The technician arrives in uniform, does a full inspection, and writes down the price. Before any work starts, you get a written price. Not a verbal estimate you have to trust. A line-item quote on paper.
4. You decide. No pressure. The quote is the quote. If you want to think about it, that’s fine. If you want to approve, we get to work right then.
5. We fix the gate, clean up, and show you the cleanup photo. Shoe covers go on before we step inside. Drop cloths protect the floor when we’re running wire or replacing an opener near the house. Before we leave, we’ll show you a photo of the clean work area. That’s the C.A.R.E. routine: clean up like it’s our own home, ask before we move or touch anything, respect your time and quiet hours, and explain the price before the work.
6. If it’s not right, we make it right within 365 days. Every repair and installation falls under our 365-Day Done Right Promise. If the latch sticks, the gate sags, or the opener acts up within a year, we’re back. No argument, no fine print.

Common Gate Problems in Fort Worth and What They Cost to Fix

Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. Here’s what we’re seeing most often in Fort Worth yards right now.

Sagging Gate (Dropped Hinge Side)

A gate that drags on the ground or won’t close cleanly usually has failing hinges or a post that’s pulling away. In Fort Worth’s clay soil, the post is the culprit about half the time. Expect to pay $200 to $480 for Hinge & Post Repair and frame realignment, or $280 to $550 if the post needs to be reset in new concrete. The fix matters because a dragging gate wears out the latch, then the hinges, then the post itself, each one more expensive than the last.

Gate Latch Won’t Catch

When a latch stops catching, the cause is almost always misalignment from sag or a worn internal spring. A standard latch replacement or Lock Repair runs $85 to $220. If the post has shifted enough that the strike plate no longer lines up, add post reset to the scope. In older Spring Garden and Como neighborhood homes with original ironwork, we’ll often rebuild the latch pocket rather than replace the whole assembly, which keeps the character of the gate intact.

Electric Gate Opens, Then Stops, Then Reverses

That stutter-step behavior is usually a failing safety sensor, a board issue, or a current-sensing problem on the opener. Sensor replacement runs $180 to $400. Board replacement runs $350 to $750. If the opener is over 12 years old and was made by a brand that’s no longer supported, replacement with a current LiftMaster, FAAC, or Mighty Mule unit runs $700 to $1,800. Our technicians are factory-trained on all nine of the major brands families actually own.

Rolling Gate Slider Sticks or Jumps the Track

Rolling gates are common on side-entry properties in Ridglea and along the Trinity Trails corridor. Sticking usually comes down to worn wheels, a bent track, or debris packed into the rail. Wheel and track repair runs $200 to $600. We clean the track, replace worn rollers, and test the full travel with the opener disconnected so we can feel every catch before we reconnect it.

How to Save on Gate Repair in Fort Worth

• Call before it fails completely. A gate that’s starting to drag is a $200 hinge job. A gate that’s fallen off its post is a $500 post reset plus the damage to the gate panel. The math favors early calls.
• Keep the track and hinges clean. Grit and dirt are the enemies of gate hardware. A quick rinse every couple of months keeps Fort Worth dust out of the rollers and hinges. We use pet-safe lubricants where there’s a choice, and we’ll tell you which one we recommend during a visit.
• Ask about combining repairs. If the latch is shot and the hinges are tired, doing both in one visit is cheaper than booking two separate trips. You pay for one service call, not two.
• Get a written price before any work starts. This is the single biggest money-saver in the entire gate repair industry. A written quote eliminates the vague upcharges and end-of-job surprises that drive costs beyond what a family budgeted for. Latch and Post provides written pricing on every visit as part of the Cedarwell Care Promise.
• Get a free estimate by phone. Call (682) 841-5749 and describe what the gate is doing. We’ll give you a realistic range over the phone and schedule a visit to confirm with a written price.

Electric Gate Repair Costs in Fort Worth

Electric gates add a layer of convenience, and they add a layer of cost when something fails. The opener motor, the control board, the safety sensors, the remote receivers, and the physical gate hardware all need to work together. When one piece goes down, the whole system stops.

What Does Electric Gate Repair Cost?

Most electric gate repairs in Fort Worth land between $350 and $1,200. The spread depends on whether we’re replacing a $40 limit switch or a $600 control board. Here’s the line-item reality:

• Limit switch or actuator adjustment: $100 – $250
• Remote receiver or keypad replacement and programming: $150 – $350
• Safety sensor (photo eye) replacement: $180 – $400
• Control board replacement: $350 – $750
• Full opener replacement (parts and labor): $700 – $1,800

Fort Worth’s summer storms bring a specific wrinkle to electric gate work. Lightning strikes and power surges take out boards and sensors every season, particularly in neighborhoods with overhead utility lines like parts of Ryan Place and South Hills. If your gate opener goes dark after a storm, call us before you assume the worst. A $350 board replacement often fixes what looks like a dead opener.

A safety note worth reading: electric gate openers involve high-tension springs, heavy moving panels, and line voltage wiring. If your opener is making grinding noises, moving unevenly, or sparking at the connection points, shut off power to the unit at the breaker and do not try to diagnose it yourself. A trained technician who knows the specific brand can identify the failure safely. This is one area where the DIY savings disappear fast when an injury or a damaged gate panel enters the picture.

Why Latch and Post Does Gate Repair Differently in Fort Worth

We’re part of the Cedarwell family of independently owned and operated gate specialists, and we’ve been doing this work since 2009. Gate repair is the only thing we do. Not fencing, not general contracting, not lawn care. Gates, gate installation, and electric gate repair, three services, no distraction.

Here’s what that focus looks like in your yard:

• A written price before work starts. Every visit, every job, no exceptions. You’ll never wonder what the final number will be halfway through a repair.
• Shoe covers and drop cloths on every visit. We lay drop cloths on the floor and put on shoe covers before we step inside. Your floors stay clean, period. And we’ll show you a photo of the clean-up before we leave.
• Background-checked, uniformed technicians. The person at your gate is a Cedarwell-trained professional with factory training on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. They’ll respect quiet hours, ask before touching or moving anything, and explain what they’re doing in plain English.
• A live person answers every call, 24/7. Nights, weekends, holidays, doesn’t matter. When your gate fails at 9 p.m. on a Sunday, a human being picks up the phone. That’s the whole promise.
• The 365-Day Done Right Promise. If a repair or installation isn’t right within a year, we make it right. No argument, no fine print, no “that part isn’t covered” conversation. Done right or we’re back.

Cody Beckman leads our Fort Worth team. He’ll tell you the same thing we’ve been telling families since 2009: every gate comes down to two parts, the latch that holds it and the post that carries it. Fix those right and everything else follows.

FAQs – Gate Repair Cost in Fort Worth

How much does it cost to fix a gate in Fort Worth?

Most Gate Repair Near Me in Fort Worth, TX costs between $150 and $650 for standard mechanical fixes like latches, hinges, and post resets. Electric gate repairs run $350 to $1,200. Call (682) 841-5749 for a free estimate and a written price before any work begins.

How much does gate repair cost per hour in Fort Worth?

Hourly rates in the Fort Worth market fall between $75 and $120 per hour for gate work, but Latch and Post quotes by the job, not the hour. You’ll know the full written price before we start, and it doesn’t change if the job takes longer than expected. Call (682) 841-5749 for a phone estimate.

Is it cheaper to repair or replace a gate?

Repair is almost always cheaper. A new single swing gate runs $1,800 to $4,200 installed, while even a major repair like a post reset runs $280 to $550. Replacement makes sense when the gate panel is rusted through, the frame is cracked, or the cost of multiple repairs exceeds 60% of replacement. We’ll give you our honest read on that line, in writing.

Can you fix a sagging gate without replacing it?

Usually, yes. Sag is typically caused by failed hinges, a loose post, or frame misalignment. We correct those issues for $200 to $550, and the gate stays original. Full replacement only enters the picture when the frame itself is structurally gone. Call (682) 841-5749 for a free assessment.

How much does an electric gate opener cost to replace in Fort Worth?

Full electric opener replacement in Fort Worth runs $700 to $1,800, parts and labor included. The price depends on the brand (LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule), the gate weight, and whether new wiring or remotes are needed. We’ll give you a written quote before we touch the opener.

Do you charge an emergency fee for after-hours gate repair in Fort Worth?

After-hours and holiday calls typically add $75 to $150 to the standard rate. We answer every call with a live person 24/7, and we’ll tell you the after-hours rate when you call, before you commit. Call (682) 841-5749 and a real human will answer.

Get a Free Gate Repair Estimate in Fort Worth

If your gate is sagging, sticking, or refusing to open, call Latch and Post Gate Repair Fort Worth at (682) 841-5749. We’ll give you a realistic price range over the phone, schedule a visit that fits your family’s day, and hand you a written price before any work starts. Clean floors, straight answers, and a repair that’s done right for a full year. That’s the promise.

Pricing reflects the Fort Worth market as of 2026. Latch and Post Gate Repair Fort Worth offers free estimates – call (682) 841-5749.

Written by Cody Beckman, Owner at Latch and Post Gate Repair Fort Worth, serving Fort Worth since 2009.