Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Arlington?
Gate repair in Arlington, TX typically costs between $185 and $550 for most common fixes in 2026, with an average service call landing around $310. The final number depends on what failed: a latch replacement runs $85 – $185, a sagging gate correction costs $150 – $350, and a full electric gate board replacement can reach $900 – $1,800. We provide a written price before any work begins, so you’ll never approve a repair without knowing the exact number.
Gate Repair Cost Breakdown (2026)
Here’s what Arlington homeowners should expect to pay for the most common gate repair near me in Fort Worth, TX services we handle. These figures reflect the local market as of early 2026, including parts and labor for a standard residential gate.
| Repair Type | Typical Cost Range | What’s Included |
|---|---|---|
| Gate latch or lock replacement | $85 – $185 | New latch assembly, alignment, hardware |
| Sagging gate correction | $150 – $350 | Hinge adjustment or replacement, post realignment if needed |
| Hinge replacement (pair) | $120 – $280 | Heavy-duty hinges, removal of old hardware, re-hanging |
| Gate post stabilization or reset | $225 – $600 | Concrete work, post leveling, curing time |
| Electric gate opener repair | $200 – $550 | Diagnostics, sensor alignment, limit switch or capacitor replacement |
| Control board replacement | $350 – $900 | New board, programming, transmitter syncing |
| Full gate opener replacement | $900 – $1,800 | New motor, arm, receiver, remotes, labor |
| Welding repair (steel or wrought iron) | $150 – $400 | Crack repair, reinforcement, rust spot treatment |
| Rolling gate track repair | $300 – $750 | Track straightening, wheel replacement, alignment |
These ranges are specific to what we see across Arlington neighborhoods like Dalworthington Gardens, Pantego, and the older subdivisions along Park Row. A gate on a newly built home in Viridian or the hills around Lake Arlington tends to have different hardware than a 25-year-old wrought iron gate on a property near UTA, and that changes the number.
Three things move the price up or down most: the gate’s weight and material, whether the post itself has shifted, and whether the opener’s control board is salvageable. A lightweight aluminum drive gate usually costs less to fix than a heavy steel estate gate. A post that’s leaning because North Texas clay shifted after a wet spring means concrete work, not just a hinge swap. And if we can repair a control board rather than replace it, you’ll save several hundred dollars.
What Affects Gate Repair Pricing in Arlington
Not all gate repairs cost the same, even when the symptom looks identical. Here’s what actually changes the number when we quote a job in Arlington.
- Gate weight and material. A hollow aluminum gate weighs far less than a solid steel or wrought iron gate. Heavier gates put more strain on hinges, posts, and opener motors, which means the underlying problem is often bigger than the visible symptom.
- Soil movement and post condition. Arlington sits on expansive clay soil that swells after rain and shrinks in drought. That seasonal shifting is the number one reason gate posts lean out of alignment here. When a post moves, the fix is concrete work, not just hardware replacement.
- Electric vs. manual gate. Manual gates cost less to repair because there’s no motor, board, or sensor to diagnose. Electric gate repair adds diagnostics time and parts: capacitors, limit switches, sensors, and receiver units all have their own price tags.
- Brand of opener. We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Parts availability varies by brand, and some boards cost more to replace simply because the manufacturer controls the supply. We’ll tell you if a generic equivalent is safe to use or if you should stay with the original brand.
- Access and site conditions. A gate at the end of a short driveway near the street is quick to reach. A back-alley gate behind a garden wall or a gate that requires removing fencing panels to access takes longer, and labor time is part of the quote.
- When you call matters less than you might think. We answer calls live 24/7, and our pricing doesn’t change based on the hour. What changes is how fast we can get a technician to you, since Arlington traffic along I-20, Cooper Street, or Pioneer Parkway affects drive time during rush hours.
Every quote we give includes the same three things: a written price before work starts, shoe covers and drop cloths on every visit inside your home, and a photo of the clean-up before our technician leaves. Those are part of the Cedarwell C.A.R.E. routine we’ve followed since 2009, and they don’t add a penny to your bill.
How Our Technicians Diagnose and Repair Your Gate
Here’s the repair process we follow on every visit, so you know what to expect from the moment our technician arrives.
- We inspect the full gate, not just the broken part. A latch that won’t catch usually means the gate has sagged, which means a hinge or post has shifted. Cody Beckman’s team checks the whole assembly: hinges, latch, posts, wheels (on rolling gates), and the opener if there is one.
- We give you the written price before touching anything. No disassembly happens until you’ve seen the number and approved it. The price we write down is the price you pay.
- We lay drop cloths and put on shoe covers before stepping inside. If we need to access a control box in your garage or inside a fence line near your house, your floors stay clean. Our technicians follow the Clean up like it is our own home standard on every job.
- We complete the repair using factory-spec parts. For brands like LiftMaster, FAAC, and DoorKing, we use manufacturer-approved components. For structural work on steel gates, we weld, grind, and prime before painting so the repair doesn’t rust out in a season.
- We test the gate through at least ten complete open-and-close cycles. Electric gates get sensor alignment checks and remote syncing. Manual gates get checked for smooth swing, latch engagement, and post stability.
- We show you a photo of the clean-up before we leave. You’ll see exactly how the work area looked when we finished, whether that’s the driveway, the garage floor, or the fence line.
If anything isn’t right within 365 days, the 365-Day Done Right Promise means we come back and make it right. No argument, no fine print.
How to Save on Gate Repair
There are a few honest ways to keep gate repair costs under control in Arlington, and they don’t involve cutting corners.
1. Fix small issues before they become structural ones
A gate that scrapes the ground or a latch that needs a shove to catch is telling you something. The longer a sagging gate runs on worn hinges, the more likely the post itself starts moving. Once the post shifts, you’re into concrete work that triples the bill.
2. Get the gate’s weight off the post now
If a steel gate has no anti-sag kit and it’s been hanging for a decade, consider adding one before the hinge tears out of the post. Anti-sag kits cost a fraction of what a post reset costs.
3. Lubricate hinges and rollers twice a year
Arlington’s heat and dust dry out hinge pins and roller bearings faster than most homeowners realize. A silicone-based lubricant applied in spring and fall keeps friction down. Less friction means less strain on hinges and opener motors, and less strain means fewer breakdowns. When there’s a choice, we use pet-safe lubricants because we know more than a few Arlington dogs patrol the backyard fence line.
4. Ask us whether repair or replacement is the better math
Sometimes fixing an old gate opener is the cheapest option today and the more expensive option over three years. We’ll tell you straight: if a 12-year-old opener with a dead board and worn gears needs $500 in repairs but a new unit is $1,100 and carries a manufacturer warranty, the replacement might cost you less per year. You’ll get both numbers in writing and you decide.
5. Use our free estimates
Every estimate we give is free, and it comes as a written price before any work starts. You’re never obligated to proceed, and we don’t pressure anyone. If you want to know what your gate repair will cost in Arlington, call (682) 841-5749 and we’ll tell you what we find.
Common Gate Problems and What They Cost to Fix in Arlington
Sagging gate
A gate that drags on the driveway or won’t stay latched usually has worn hinge pins, a bent hinge, or a post that’s begun to lean, which our hinge & post repair service addresses. Hinge replacement runs $120 – $280, but if the post has shifted in Arlington’s clay soil, expect $225 – $600 for a post reset. In older neighborhoods like the ones around Arkansas Lane and Fielder Road, we often find the original post was never set deep enough for the soil’s expansion cycle.
Gate latch that won’t catch
Latch replacement is the most common repair we do, and it’s also the least expensive: $85 – $185 including hardware and alignment. If the latch plate has stripped out of the post, we’ll fill and re-drill as part of the same repair rather than scheduling a second visit.
Electric gate opens halfway or not at all
This is usually a sensor alignment issue, a failing capacitor, or a limit switch that’s drifted. Diagnostics plus repair runs $200 – $550 for most brands. If the control board itself has failed, add $350 – $900 depending on whether you have a LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule opener. We stock or can quickly source boards for all of those brands.
Gate post leaning
A leaning post is the most expensive manual gate problem because it requires concrete removal, post re-setting, and curing time. In Arlington, posts lean most often after a wet winter followed by a hot dry summer: the soil swells, then contracts and pulls away from the post. Full post reset with new concrete runs $225 – $600 depending on post size and how much old concrete has to come out.
Rolling gate stuck or jumping the track
Rolling gates on Arlington commercial properties and larger residential lots wear out wheels and track sections over time. Track repair, wheel replacement, and alignment runs $300 – $750. If the track has been hit by a vehicle, the repair may involve cutting out a bent section and welding in a new one.
Why Arlington Homeowners Choose Latch and Post Gate Repair
We’re a Cedarwell-family gate specialist, not a general handyman service. Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, and it’s the only job we do.
Our technicians are background-checked, uniformed, and factory-trained on the gate opener brands families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That training matters because a Mighty Mule board has different failure modes than a DoorKing board, and knowing the difference means the right fix happens on the first visit.
Here’s what you can expect when you call us:
- Written price before any work starts. Always included, never a surprise. You see the number before a single tool comes out.
- Shoe covers and drop cloths on every visit. If we step inside your home, your floors stay clean. We also send you a photo of the clean-up before the technician leaves, at no extra charge.
- Quiet tools when kids are asleep. We can schedule around nap time if that matters to you. We ask before we move or touch anything on your property.
- A live person answers every call, 24/7. Nights, weekends, holidays. No voicemail, no callback queue. You call, a person picks up.
- 365-Day Done Right Promise. If the repair or installation isn’t right, we make it right. No argument, no fine print.
Latch and Post Gate Repair Fort Worth is part of the home services family that has served the metro area since 2009. Each location is an independent local business that works to the same Cedarwell Care Promise we’ve always held.
FAQs – Gate Repair Cost in Arlington
How much does gate repair cost in Arlington, TX?
Most gate repair costs in Fort Worth, TX for Arlington properties run between $185 and $550 as of 2026. Small fixes like latch replacement run $85 – $185, while electric gate opener repairs run $200 – $550. You’ll get an exact written price before we start any work. Call (682) 841-5749 for a free estimate from our team.
Is it cheaper to repair or replace a gate opener?
Repairing an opener costs $200 – $550 for typical fixes, while full replacement runs $900 – $1,800. If your opener is under 7 years old and the issue is a sensor, capacitor, or limit switch, repair usually wins. If it’s 10+ years old with a dead board and worn gears, replacement often costs less per year. We’ll give you both numbers in writing so you can decide without pressure.
How much does it cost to fix a sagging gate in Arlington?
Fixing a sagging gate costs $150 – $350 when it’s a hinge problem. If the post itself has shifted, expect $225 – $600 for a full post reset with concrete. Arlington’s expansive clay soil makes post shifting common, especially after wet winters and dry summers.
Can you repair my electric gate the same day?
In most cases, yes. We keep common parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers on our trucks, so a typical sensor, capacitor, or limit switch repair is done in one visit. Board replacements may take a day or two if we need to source a specific part. Call (682) 841-5749 and we’ll tell you what we can do today.
Do you charge extra for emergency gate repair at night or on weekends?
No. We answer calls live 24/7, and our pricing doesn’t change based on the hour or the day. The quote you get is the same at 2 PM on a Tuesday as it is at 2 AM on a Sunday. You’ll see the written price before any work begins.
What brands of gate openers do you repair?
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers the majority of residential electric gates in Arlington, from newer builds in Viridian to older homes around the UTA area.
Get a Free Gate Repair Estimate in Arlington
If your gate is sagging, sticking, or refusing to open, we’ll send a background-checked technician to diagnose the problem and hand you a written price before any work begins. No pressure, no surprises, and shoe covers on before we step inside. Call (682) 841-5749 any time, day or night, and a live person will answer.
Pricing reflects the Arlington market as of 2026. Latch and Post Gate Repair Fort Worth offers free estimates – call (682) 841-5749.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fort Worth, serving Arlington since 2009.
What Our Customers Say
"Good repair on a sagging gate. Part for the older motor took a few days, so two trips, but they explained it and were tidy and polite each time. Gate works smoothly now."
- Carmen Ulloa"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick