Ghost Controls Gate Repair Service Nationwide

Why Fort Worth Homeowners Choose Ghost Controls Gate Repair

We provide independent Ghost Controls service in Fort Worth, from Tarrant County ranches to gated communities inside the 820 loop. Our crews work on Ghost Controls operators every week, which means we diagnose boards, arms, and limit issues faster than a generalist gate company ever could. We are not authorized by Ghost Controls, and we say that plainly because it matters: we answer to you, not to a manufacturer’s service quota. Call (682) 841-5749 and a live person answers, day or night.

Call (682) 841-5749

This page is built from Fort Worth-specific Ghost Controls repair data. The same North Texas heat, lightning, and red clay that kills these operators here shows up in our service records, and we’ve written down what we’ve learned so you get failure modes and fixes a generic knowledge base will never mention. That’s the point of this page, and the point of how we work.

Why Trust Latch and Post Gate Repair Fort Worth for Your Ghost Controls Gate Repair?

Our technicians train on the brands families actually own, and Ghost Controls is one we see constantly. Cody Beckman, our owner, learned mechanical systems and welding at Los Angeles Trade-Technical College before gate work became his focus, and he’s spent well over a decade diagnosing the actual problem rather than swapping parts until something sticks. That habit saves Fort Worth customers a fair amount of money, because a Ghost Controls operator usually has one real fault and a handful of things that look like faults.

When we open a Ghost Controls control box, we know what we’re looking at. We know which boards tend to lock up after a thunderstorm flicker, which limit cams drift after a North Texas freeze-thaw cycle, and which bearings seize when Parker County red clay dust gets past the boot seal. That means the right fix happens on the first visit more often than not, and the price you approved before we started doesn’t change halfway through the job. We use OEM-compatible parts where they make sense and better-than-OEM parts where the factory design has already failed once in Texas conditions. You get a written price before any work begins, every single visit.

Common Ghost Controls Gate Repair Problems We Fix in Fort Worth

• Motherboard lockups after rolling Fort Worth thunderstorm power flickers. This shows up most often on HDP1 solar and battery-backed dual-gate systems without a surge suppressor. The board gets hit with a voltage spike, freezes, and the gate stops responding to remotes and keypads. We diagnose the board, then install surge-hardened terminal blocks so it doesn’t happen again next storm season.
• Limit cam drift on TSS1 openers after freeze-thaw cycles. North Texas clay soil heaves, temperatures swing, and the mechanical limit cams inside TSS1 residential swing gate kits slowly walk out of position. The gate slams into the post or stops short by six inches. We reset master and slave travel limits and re-align the hinges so the gate closes true.
• Axle bearing seizure inside AXP1 and AXP2 heavy-duty swing arms. Red clay dust from yards across Parker County and west Fort Worth works past the boot seal and grinds the axle bearings dry. The arm starts to groan on startup, then binds. We replace the bearing set with sealed-bearing upgrade kits that hold up better than the factory boots in dusty conditions.
• Wireless keypad and intercom sync dropout on DSL1 slide gates. Fort Worth afternoon sun on a west-facing post bakes the control box until internal temperatures climb high enough to scramble wireless pairing. The gate still works from a hardwired button but won’t respond to the keypad. We fix the sync, then relocate or shield the control box so the next July heat wave doesn’t undo the work.
• Shadow leaf stalling on TDS2 dual swing gate kits. You press the remote, the first leaf opens, and the second leaf just sits there. We’ve traced this to a master arm limit cam that’s drifted enough in the heat that the slave leaf catches on a slightly sagging post bracket. We realign both hinged posts, reset travel limits, and the gate cycles clean.

Ghost Controls Parts & Our Repair-vs-Replace Approach

We start with genuine Ghost Controls boards and limit assemblies where the owner wants a bolt-in OEM repair. That’s the right call for a newer unit with a single failed component. But we also stock and recommend sealed-bearing upgrade kits and surge-hardened aftermarket transformers when the factory part has already failed once in Texas heat or lightning season. There’s no point putting the same fragile board back into the same west-facing sun box and calling it a repair.

The honest repair-vs-replace conversation goes like this: if the motor arm is original on a 6-plus-year-old AXP or TSS unit and the board also needs replacement, we quote both the repair and a full operator replacement. You see both numbers in writing, and you choose. Sometimes the repair is the better long-term value. Sometimes the replacement is cheaper over five years. We’ll tell you which one we’d pick for our own gate and why. Call (682) 841-5749 and we’ll walk through it.

Our Ghost Controls Service Process – Step by Step

1. 1
   Diagnosis. We ask what the gate is doing, then open the control box and listen. Cody’s signature phrase applies here: “Tell me what the gate is doing, and I’ll tell you what it needs – usually those are two different conversations.” We test the board, the limit cams, the transformer, and the arm before we recommend anything.
2. 2
   Written price. You get a written price before any work begins, with the parts broken out separately. No pressure. If you want to think about it, the price holds and we come back.
3. 3
   Repair or install. We lay drop cloths and put on shoe covers before we step inside a garage or mudroom where the power supply lives. We use quiet tools when kids are asleep and pet-safe lubricants where there’s a choice. We ask before we move or touch anything that belongs to you.
4. 4
   Test and clean up. We cycle the gate through every function: open, close, stop, obstacle detection, remote, keypad, battery backup if you have it. Then we clean up and show you a photo of the area before we leave.
5. 5
   Warranty. Every Ghost Controls repair we do is covered by the 365-Day Done Right Promise. If the repair isn’t right, we make it right – no argument, no fine print.

Ghost Controls Products We Service & Install in Fort Worth

We service and install the full Ghost Controls residential lineup that we see across Fort Worth: TSS1 and TDS2 residential swing gate kits, AXP1 and AXP2 heavy-duty swing arm operators, DSL1 and DCL1 slide gate operators, and HDP1 solar and battery-backed dual-gate systems. We stock common Ghost Controls boards, limit assemblies, sealed-bearing upgrade kits, and surge-hardened transformers locally, which means many repairs happen same-visit rather than waiting on a parts shipment. We also handle gate repair including linear motor replacement, battery backup installation, and gate realignment on every Ghost Controls model we touch.

We Also Service These Brands

We’re not tied to a single brand. Alongside Ghost Controls, our technicians carry the training and local parts for LiftMaster, Mighty Mule, and DoorKing, plus FAAC, BFT, Linear, Viking, and Elite. If your gate operator is a different brand than you thought, or a previous owner left you with a mystery box, we’ll identify it and work on it.

FAQs – Ghost Controls Gate Repair Service in Fort Worth

Is Latch and Post Gate Repair Fort Worth authorized by Ghost Controls? No, we are an independent Ghost Controls service provider, not an authorized dealer or warranty center. That independence shapes how we work: we recommend repair or replacement based on what’s best for your gate and your budget, not on a manufacturer’s parts sales goal.

Do you use genuine Ghost Controls or OEM parts? We use genuine Ghost Controls boards and limit assemblies for bolt-in OEM repairs, and we also stock sealed-bearing upgrade kits and surge-hardened aftermarket transformers when the factory part has failed once already in Texas conditions. You’ll see the parts choice on your written quote and approve it before we start.

How long does Ghost Controls service take? Most Ghost Controls diagnoses take under an hour. Common repairs like limit cam resets, keypad resyncs, and bearing replacements often happen the same visit. Bigger jobs such as full operator replacement or rewiring a dual-gate setup may take a half day to a full day depending on the driveway layout and power access.

What Ghost Controls models and series do you cover? We service and install TSS1, TDS2, AXP1, AXP2, DSL1, DCL1, and HDP1 systems, including solar and battery-backed configurations. If you have a Ghost Controls model not listed here, call us anyway – if it’s a residential swing or slide gate operator, we’ve almost certainly worked on it.

Will service void my Ghost Controls warranty? If your operator is under manufacturer warranty, we’ll tell you before we touch anything and we’ll only proceed with your go-ahead. Independent repair can affect warranty coverage depending on the manufacturer’s terms, so we walk through that honestly before any work begins.

How much does Ghost Controls gate repair cost in Fort Worth? Ghost Controls gate repair in Fort Worth typically runs between $180 and $420 for common fixes like limit cam resets, keypad resyncs, and bearing replacements. Full operator replacement on an older AXP or TSS unit usually runs $850 to $1,600 depending on the model, gate size, and power work involved. You’ll see your exact written price before we start. Call (682) 841-5749 for a free estimate.

Book Your Ghost Controls Service in Fort Worth, TX

If your Ghost Controls gate is acting up, call (682) 841-5749 now. A live person answers every call, 24 hours a day, seven days a week. We’ll ask what the gate is doing, set a visit time, and show up with the parts and a written price.

Written by Cody Beckman, Owner at Latch and Post Gate Repair Fort Worth, serving Fort Worth since 2009.