Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateViking Gate Installation in Fort Worth: What to Know First
Viking gate installation in Fort Worth runs between $1,800 and $4,600 for a standard single driveway gate, with most jobs completed in one to two days once the gate and hardware arrive. We’re an independent Viking service provider, not an authorized dealer, which means we give you straight answers about parts and pricing without a manufacturer-required upsell. If you own a Viking gate in Fort Worth and it’s sagging, sticking, or simply worn past the point of dependable service, call (682) 841-5749 and we’ll give you a written price before any work begins.
This page is for homeowners in Arlington Heights, Wedgwood, TCU, Ridglea, and across Fort Worth who rely on a Viking gate every day and want it installed correctly the first time. We’ll explain how Viking hardware behaves, what fails on specific models, and what a proper installation actually includes.
Key Takeaways
- Viking gate installation in Fort Worth costs $1,800 to $4,600 for most residential driveway gates, quoted in writing before work starts.
- Viking’s residential slide gates are solid, but their electronics and certain hinge assemblies wear faster in Texas heat and clay-heavy Fort Worth soil.
- Latch and Post Gate Repair Fort Worth is an independent Viking service provider, factory-trained on the brand but not authorized by them.
- Every job includes shoe covers, drop cloths, a cleanup photo, and the 365-Day Done Right Promise.
Styles & brands we work with
How Viking Products Fail – and How We Fix Them
Viking gates are common in Fort Worth, particularly in neighborhoods built in the 1990s and 2000s where builders spec’d the brand for perimeter and driveway gates. They’re generally well-made mechanically, but we see the same handful of issues repeat across the city. Here’s what actually goes wrong and what we do about it.
- Viking L-3 and R-3 slide gate chain drive wear. The chain and sprocket assembly on these residential slide operators stretches over time, especially when the gate runs multiple times a day on a long driveway. The symptom is a gate that jerks or shudders about a foot after it starts moving. We replace the chain and realign the sprockets in the same visit, which usually eliminates the shudder without swapping the motor.
- Viking ALEKO-style single swing gate hinge sag. On heavy ornamental steel gates, the lower hinge pin wears unevenly because Fort Worth’s clay soil shifts slightly with rain and drought. The gate starts dragging at the far end even when the post looks straight. We install a hardened hinge bushing or reset the post base, depending on how far out of plane it has moved.
- Viking VG-3 and VG-5 control board capacitor failure. This is the one we see most often after a lightning storm or a power surge through the line. The gate beeps but won’t move, or moves three inches and stops. The fix is a new capacitor or board, and we always quote the OEM part alongside a quality aftermarket option so you can choose.
- Viking photobeam sensor misalignment on double gates. When both leaves meet, one side reads a false obstruction and reverses. It’s usually the sensor bracket, not the sensor. A cracked weld or a loose U-bolt lets the beam drift far enough to trip the safety circuit. We re-square the brackets and weld them if needed.
- Viking keypad and receiver coding drift. Older Viking keypads lose their transmitter code slowly; the gate works most days, then refuses to open, then works again. Rather than replacing the whole unit, we test the transmitter frequency and reflash the receiver when the board supports it. When it doesn’t, we’ll tell you honestly and quote a replacement.
Our Viking Gate Installation Process
Every Viking gate installation in Fort Worth follows the same routine, and you’ll know the price for each step before we start.
- 1
We inspect the posts and ground first. A Viking gate is only as good as what it’s attached to. We check post plumb, the concrete or steel post base, and how the soil around the foundation has moved.
- 2
We measure the gate and opening. We confirm the weight, the hinge side, the slope, and the exact clearances before ordering anything.
- 3
We price OEM and quality aftermarket parts. We’ll always quote a genuine Viking part when it’s available; when a good aftermarket part does the same job for significantly less, we’ll show you both numbers and let you decide.
- 4
We do the installation. Shoe covers on inside the house, drop cloths under the work area, and quiet tools if you tell us a kid is napping.
- 5
We test the full cycle. Open, close, obstruction reversal, safety edge, keypad, remote. We run it a dozen times before we call it done.
- 6
We photograph the cleanup and walk you through the work. You’ll see a photo of the clean area before we leave, and the warranty is in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Viking Gate Installation Costs in Fort Worth
Most Viking gate installations in Fort Worth land in these ranges:
- Single swing gate, standard steel, no operator: $1,800 to $3,200 installed.
- Single slide gate with Viking operator: $2,800 to $4,600 installed, depending on track length and power run.
- Double driveway gate, both leaves with operator: $3,500 to $6,800 installed.
- Pedestrian gate only: $900 to $1,800 installed, depending on steel gauge and hardware.
- Control board replacement only: $425 to $800 installed, depending on the Viking series.
What moves the price: gate weight, the distance from your electrical panel to the operator, whether the existing posts are reusable, and whether you want a keypad added. You’ll get the exact number in writing before we touch anything. Call (682) 841-5749 for a free estimate.
Why Fort Worth Homeowners Call Latch and Post Gate Repair Fort Worth for Viking Work
We’ve been doing gate work since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. Viking is one of the brands we see most in Fort Worth, and our technicians are trained on it alongside LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so when a Viking board fails and a compatible LiftMaster receiver is the better fix, we’ll tell you.
Every job comes with the 365-Day Done Right Promise. If the installation isn’t right, we make it right, no argument. Every visit starts with a written price. Every technician is background-checked and uniformed. We lay drop cloths on the floor and put on shoe covers before we step inside, and we send a cleanup photo before we leave. A live person answers the phone around the clock. Cody Beckman, our owner, puts it plainly: “Tell me what the gate is doing, and I’ll tell you what it needs – usually those are two different conversations.”
FAQs
Yes. We match gate steel gauge, color, and hardware finish to your existing fence and posts, and we’ll re-use your current Viking operator when it’s still in good shape. We’ll tell you honestly if the motor is near the end of its life before we hang a new gate on it. Call (682) 841-5749 and we’ll take a look.
For many older Viking gate models, parts are still available through distributors, though certain control boards have been discontinued. When an OEM board is gone, we’ll quote a compatible aftermarket board that runs the same motor and safety circuits. We’ll show you both options in writing before you commit.
A standard single gate replacement installs in one day. A full driveway gate with a new operator, post work, and electrical run typically takes two days. If the ground is heavily waterlogged after a stretch of Fort Worth rain, we’ll reschedule rather than set posts in unstable soil.
If the gate steel is sound and the only issues are electronics, hinges, or a sagging post, repair is almost always cheaper. When the steel itself is rusted through at the bottom rail, or the cost of repairing multiple systems approaches half the cost of a new gate, replacement starts to make more sense. We’ll give you both numbers and let you choose.
We answer the phone live around the clock, and we schedule services as fast as our technicians are available in Fort Worth. For a gate that won’t close and leaves your yard unsecured, we prioritize your call. For full installations or measured new gates, we’ll set a date and give you a written scope and price before the work day.
Get a Written Price for Your Viking Gate Installation
If your Viking gate is past repairing, or you’re replacing a gate and operator together, call (682) 841-5749. We’ll inspect it, measure it, and give you a written price with no pressure to accept. You’ll know exactly what it costs before we start, and if it isn’t right a year from now, the 365-Day Done Right Promise still applies. Serving Fort Worth and nearby areas.
Written by Cody Beckman, Owner, Latch and Post Gate Repair Fort Worth at Latch and Post Gate Repair Fort Worth, serving Fort Worth and nearby areas.