Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterGate Realignment in Fort Worth, TX
A gate that drags, won’t latch, or sits crooked usually needs realignment, not replacement. In Fort Worth’s shifting clay soil, gate posts move over time, and that movement throws the entire gate out of square. At Latch and Post Gate Repair Fort Worth, we realign gates so they swing true, latch cleanly, and stop wearing down hinges and motors. Call (682) 841-5749 and we’ll walk you through what’s happening with your gate. This work falls under our broader Gate Repair service, and it’s one of the most common calls we take across Tarrant County.
Realignment matters for more than convenience. A sagging gate puts uneven load on the hinge side, which shortens the life of the post, the hinges, and on automated gates, the opener itself. Our technicians diagnose why the gate drifted in the first place: loose hinge bolts, a post that settled, a bent hinge leaf, or ground that heaved after a wet spring. Then we correct it and verify the gate clears the ground and latches without a fight.
Key Takeaways:
- Gate realignment in Fort Worth typically costs between $180 and $450 depending on the cause and gate size.
- Most realignments are completed in a single visit, often within two to three hours.
- We service Ghost Controls, DoorKing, Elite, and Mighty Mule systems after realignment to confirm opener function.
- Written price before any work begins, every visit.
- Backed by the 365-Day Done Right Promise.
When You Need Gate Realignment
Most homeowners notice the signs before they know the name for it. The gate worked fine for years, then slowly started misbehaving. Here are the symptoms we see most often across Fort Worth, from Wedgwood to Park Glen:
- The gate drags across the driveway or grass. This is a classic post-settlement issue. Clay soil in Fort Worth expands when wet and contracts in dry heat, which gradually tilts posts out of plumb.
- The latch no longer lines up with the strike plate. If you have to lift or shove the gate to get it to catch, the gate has shifted. Forcing it wears the latch and eventually bends the hardware.
- The gate swings open or closed on its own. A gate that won’t stay put is out of level. Gravity takes over, and the gate drifts to the low side.
- You hear groaning or grinding when the opener runs. After realignment, a DoorKing or Ghost Controls opener should move the gate without strain. If it’s laboring, the gate geometry is off.
- The gap at the top of the gate is visibly wider on one side. Stand back and look at the gap between the gate and the post. Uneven spacing means the gate or post has moved.
- The gate bangs shut or won’t close fully against the stop. This is common after a season of heavy rain followed by dry heat. The ground shifts, the post tilts a few degrees, and nothing lines up anymore.
If you’re seeing any of these, the fix is usually straightforward. The longer a misaligned gate runs, the more damage it does to hinges, posts, and opener gears. We’d rather catch it early.
Our Gate Realignment Process
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. Here’s how a realignment visit works with us:
- We inspect the full gate assembly. Before touching anything, we check hinge bolts, post plumb in both directions, gate level, latch alignment, and the condition of the concrete or footing around each post. We look for the root cause, not just the symptom.
- We give you a written price. You’ll see the exact number in writing before any work begins. No pressure, no surprises. If the gate only needs hinge adjustment, the price reflects that. If a post has to be lifted and re-set, you’ll know before we pick up a tool.
- We correct the alignment. Depending on the cause, this means tightening or replacing hinge hardware, shimming hinge leaves, adjusting the latch and strike plate, or re-setting a post that has shifted out of plumb. We carry the common hardware with us on the truck.
- We test the full swing and latch. We open and close the gate by hand several times, check that it clears the ground evenly, and confirm the latch catches without force.
- We verify opener function. If you have an automated gate, we run the opener through a full cycle after realignment. Elite and Mighty Mule systems in particular are sensitive to gate geometry, and a realigned gate is easier on the motor.
- We leave the area clean and show you the proof. Shoe covers and drop cloths are standard on every visit, and before we leave we take a photo of the clean-up. You’ll see it.
Gate Realignment Pricing in Fort Worth
Realignment pricing depends on what actually moved. A hinge adjustment with latch alignment is the lighter end of the scale. A post that needs to be dug out, re-set, and concreted is understandably more involved. Here’s what we typically see in Fort Worth:
- Hinge adjustment and latch realignment: $180 to $280. This covers tightening or shimming hinges, adjusting the latch position, and confirming the gate swings square.
- Post re-alignment or re-setting (single post): $300 to $450. This includes freeing the post, re-setting it plumb and level, and replacing the concrete footing if needed.
- Opener re-calibration after realignment: Often included with the realignment itself. If the opener needs new limit settings or force adjustments, we handle it as part of the visit when we’re already on site.
These are honest ranges for the Fort Worth market, not national averages. Your exact price is in writing before we begin. We don’t charge for an estimate. If you’re wondering whether the gate needs realignment or a full replacement, call (682) 841-5749 and we’ll give you a straight answer either way.
Why Realignment Is Worth Doing Right
A gate that’s even slightly out of square wears everything downstream. Hinges carry uneven load and fatigue. Latch hardware gets forced and bent. On automated gates, the opener works harder with every cycle, which shortens motor life and can burn out limit switches. We see this pattern on gates from Saginaw to Mansfield: a small alignment issue ignored for a year becomes a hinge replacement, then a post replacement, then an opener failure.
Our factory experience with Ghost Controls, DoorKing, Elite, and Mighty Mule means we know how gate geometry affects the electronics. A properly aligned gate is quieter, easier on the motor, and far less likely to fail in the middle of a school run. We’d rather fix the alignment today than sell you a new opener next spring.
FAQs – Gate Realignment
How much does gate realignment cost in Fort Worth?
Most gate realignments in Fort Worth run between $180 and $450, depending on whether we’re adjusting hinges and latch hardware or re-setting a post that has shifted. You’ll receive a written price before any work starts, and estimates are free. Call (682) 841-5749 for an exact quote on your gate.
Can you realign my gate the same day?
In most cases, yes. Hinge and latch realignments are typically completed in a single visit, often within two to three hours. Post re-setting can take longer because the concrete footing needs time to cure before the gate is hung and tested. We’ll tell you upfront what the timeline looks like for your specific gate.
Is it cheaper to realign or replace my gate?
Realignment is almost always less expensive than replacement when the gate itself is still structurally sound. A new gate in Fort Worth starts around $900 and goes up from there, before you account for hardware and opener work, as detailed in our How Much Does Gate Repair Cost? (2026 Price Guide) - Fort Worth, TX. If your gate is rusted through, cracked, or the post is rotted below grade, replacement may be the honest recommendation. We’ll show you what we see and let you decide.
Do you work on gates with automatic openers?
Yes, we realign gates equipped with Ghost Controls, DoorKing, Elite, and Mighty Mule openers, then re-verify the opener runs correctly through a full open and close cycle. Gate geometry matters to these systems, and realignment often clears up opener strain that would otherwise lead to a motor failure.
What should I do before the technician arrives?
Make sure the gate area is clear of vehicles, trash bins, and anything stored against the fence line. If you have dogs, we’ll ask that they’re secured before we enter the yard. That keeps our technician safe and your pets calm. We’ll knock before touching anything, and we’ll explain the plan and the price before any work begins.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fort Worth, serving Fort Worth.
If your gate is dragging, sagging, or refusing to latch, we’ll sort it out. Call (682) 841-5749 for a free estimate. We cover every visit with the 365-Day Done Right Promise: if it’s not right, we make it right. No argument, no fine print. That’s the Cedarwell way, and it’s how we’ve done things since 2009.