Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterWeld & Rust Repair in Fort Worth, TX
Weld and rust repair in Fort Worth typically costs between $185 and $650 depending on the damage, and most jobs are completed in a single visit. When a gate hinge tears away from its post or rust eats through the bottom rail of a driveway gate, welding is the repair that actually lasts, not a patch that fails again next spring. Latch and Post Gate Repair Fort Worth handles this work daily for homeowners across Fort Worth, from the older iron gates in Mistletoe Heights to the modern steel gates in Walsh and Ventana, as part of our our Gate Repair services.
Fort Worth’s climate works against metal gates. The summer heat expands steel, the spring storm season drives moisture into every hairline crack, and the humidity that lingers from April through October gives rust a foothold before you ever notice the first blister in the paint. By the time a homeowner sees flaking metal or a sagging corner, the inside of the tube or the back of the hinge plate is usually further along than the outside suggests. That is why we treat weld and rust repair as its own discipline, not an add-on to a general service call. Every gate comes down to two parts: the latch that holds it and the post that carries it. When either one fails, the gate is only as good as the metal holding it together. Visit our Gate Repair in Fort Worth page to see the full scope of what we service. You can also return to our home page for an overview of everything we do.
When You Need Weld & Rust Repair
Here are the situations we see most often in Fort Worth, and the ones that mean it is time to call (682) 841-5749 before the damage spreads further:
- Hinge plates pulling away from the post. The gate still opens, but it dips at the latch side and you can see daylight between the hinge plate and the post. In older Fort Worth neighborhoods like Ryan Place or Berkeley Place, we regularly see hinge plates that were tack-welded decades ago and have finally started to crack.
- Rust-through on the bottom rail or gate frame. Water collects inside the lower rail of a gate, especially after a wet spring. By the time rust shows as a raised line or a soft spot, the metal behind it is thinning. This is the most common repair we weld on driveway gates in Fort Worth.
- Cracked welds on ornamental gates. Hand-forged or ornamental iron gates in areas like Fairmount and Arlington Heights often have decorative scrollwork attached with small welds. A hairline crack in one of those welds can let a whole section of the gate flex and rattle with every open and close.
- Post rust at the base, just above the concrete or soil line. That is where moisture sits longest. If the post is still structurally sound, we can often weld a reinforcing sleeve or repair the affected section rather than replace the entire post and disturb the surrounding concrete or landscaping.
- Gate frame twist or sag from a failed weld. A single broken weld on a cantilever or slide gate changes the load path for the entire frame. The gate may still move, but the motor is now working harder and the wheels or rollers are wearing unevenly.
- Electric gate brackets or actuator mounts corroding. For gates with operators from Ghost Controls, DoorKing, or Mighty Mule, a rusted actuator mount or a bracket that has cracked off can put the whole system out of alignment. We weld the mount back to solid metal and treat the surrounding area for rust before reassembling.
Our Weld & Rust Repair Process
Here is how we work when you call us for weld or rust repair in Fort Worth:
- We assess the full gate, not just the visible damage. Rust is like an iceberg. We check the hinge points, the back of the plate, the inside of the lower rail where we can access it, and the condition of the post below grade. We want to know what caused the failure, not just where it finally gave way.
- We give you a written price before any work begins. After the assessment, we put the cost on paper and hand it to you. No pressure, no “while we’re here” upsells. You see exactly what you are paying for and you decide whether to proceed. This is the Cedarwell Care Promise, and it applies to every visit, without exception.
- We prep the work area and protect your home. Before we touch the gate, our technician lays drop cloths and puts on shoe covers if we need to step inside to access a control box or keypad. We ask before we move anything, and we keep noise down if you have kids napping or a dog that is already on edge.
- We grind, clean, and repair the metal properly. Rust does not get painted over. We grind the affected area back to clean, bright metal, cut out any section that is too thin to save, and weld in fresh steel or weld the cracked joint solid again. For surface rust we treat the area before any protective coating goes on.
- We protect the repair for Fort Worth’s weather. We apply a rust-inhibiting treatment to the repaired area and, where the job calls for it, we match the finish as closely as possible. Then we test the gate through a full open-and-close cycle to make sure the fix holds under real load.
- We photograph the clean-up and leave your property the way we found it. Before the technician pulls out of the driveway, they take a photo of the cleaned work area. You get the photo, the written price record, and a clean floor. That is the Cedarwell C.A.R.E. routine on every single job: Clean up like it is our own home, Ask before we move or touch anything, Respect your time and quiet hours, Explain the price before the work.
Every repair is covered by the 365-Day Done Right Promise. If the weld does not hold or the rust comes back within a year, we make it right. No argument, no fine print, no charge to you.
Weld & Rust Repair Pricing in Fort Worth
We quote every job individually, because a cracked decorative scroll on a pedestrian gate and a rusted-out bottom rail on a 20-foot driveway gate are not the same repair. Here is the honest range we see across Fort Worth, based on the work we have done in the last few years, with full details in our guide on How Much Does Gate Repair Cost? (2026 Price Guide) - Fort Worth, TX:
- Cracked weld repair on a single joint: $185 to $300, including grinding, welding, and rust treatment
- Hinge plate re-weld or reinforcement: $220 to $380 depending on whether the plate needs to be replaced with a thicker one
- Surface rust removal and treatment on a standard pedestrian gate: $250 to $450 including full prep and protective coating
- Rust-through repair on a bottom rail or frame section: $350 to $650 depending on how much steel needs to be cut out and replaced
- Post base repair at the soil or concrete line: $275 to $550 if the post is still sound enough to save with a welded sleeve or reinforcement
What moves the price is the thickness of the metal, how much rust has to be ground out, and whether the gate needs to be removed or supported while we weld. A gate that is still hanging but cracked is quicker than one that has already separated from its hinge and may need Gate Realignment. Every estimate is free and every price is written down before work starts. You will never get a “surprise” number after the fact. Call (682) 841-5749 and we will take a look.
Why Fort Worth Homeowners Call Latch and Post
There are plenty of welders in Tarrant County who can run a bead. There are far fewer who understand how an electric gate operator from Elite or a slide gate system from DoorKing interacts with the metal it is bolted to, which is why Automatic Gate Repair requires specialized knowledge. When a weld repair changes the weight distribution of a gate even slightly, the operator can bind, the limit settings can drift, and you end up trading a rust problem for a motor problem. We are factory-trained on the brands families in Fort Worth actually own, including Ghost Controls, Mighty Mule, and DoorKing, and we approach every weld with the full system in mind, not just the cracked piece in front of us.
We are part of the Cedarwell family of independently owned and operated gate specialists. We have been at this since 2009, and the way we show up to a home has not changed: written price before work, shoe covers and drop cloths inside, background-checked and uniformed technicians, and a live person answering the phone 24 hours a day, seven days a week. When you call (682) 841-5749 at midnight because your gate is hanging off one hinge and the dog can get out, a human answers. Not a voicemail, not a callback queue.
We also schedule around real family life. If nap time matters, say so. If the kids are home from school, we will keep the grinding to the driveway and away from the open windows. And where there is a choice between products, we choose pet-safe lubricants and treatments. Your floors stay clean, your air stays free of harsh chemical smells, and your gate works when we leave.
FAQs – Weld & Rust Repair
How much does weld and rust repair cost in Fort Worth?
Weld and rust repair in Fort Worth typically costs between $185 and $650, with most single-joint crack repairs landing between $185 and $300 and rust-through frame repairs running $350 to $650. The exact number depends on the thickness of the metal, how much rust has to be removed, and whether the gate needs to be supported during the weld. Call (682) 841-5749 and we will give you a free assessment and a written price before any work begins.
Can you fix a rusted gate without replacing the whole thing?
In most cases, yes. If the structural frame is still sound and the rust is confined to a bottom rail, a corner, or the base of a post, we can grind out the damaged section, weld in new steel, and treat the surrounding area. Replacement is only necessary when the rust has compromised more than a small section of the gate’s load-bearing structure. Call (682) 841-5749 for an honest assessment, not a sales pitch.
How long does a weld repair on a gate last in Fort Worth?
A properly prepared and protected weld repair on a gate in Fort Worth should last the life of the gate. The key is preparation: clean metal, solid welds, and rust-inhibiting treatment on the surrounding area. We back every weld and rust repair with our 365-Day Done Right Promise, so if it does not hold within a year, we make it right at no charge. Call (682) 841-5749 to schedule a free estimate.
Can you come today if my gate is hanging off its hinges?
Call (682) 841-5749 and a live person will answer, day or night. If we can get a technician to your Fort Worth home today, we will. A gate hanging by one hinge is a real safety issue, especially with kids or pets in the house, and we treat those calls as a priority.
Contact Latch and Post Gate Repair Fort Worth
If your gate has a crack, a sag, or rust that has gone further than you first thought, call (682) 841-5749 for a free estimate. We will come out, assess the full gate, and put the exact price in writing before any work starts. A live person answers the phone 24/7, and every weld is covered by the 365-Day Done Right Promise. Call today and get your gate solid again.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fort Worth, serving Fort Worth.