Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Kennedale
An electric gate that won’t open in Kennedale isn’t something you can ignore until the weekend. Long driveways off Mansfield Cardinal Road and acreage lots across town mean the gate is the only way in and out. When it fails, you’re either stuck or locked out. Our Electric Gate Repair team handles that problem the same day you call, with a written price before we touch anything. Most motor and opener repairs in Kennedale run between $240 and $560, and we stock common LiftMaster, Linear, Viking, Ghost Controls, and DoorKing parts locally so we’re not waiting on a warehouse while your driveway sits blocked. Call Latch and Post Gate Repair Fort Worth at (682) 841-5749 and a live person answers, day or night.
Why Latch and Post Gate Repair Fort Worth Is Kennedale’s Preferred Electric Gate Repair Company
Kennedale is a different kind of service area for us. It’s not rows of cookie-cutter houses. It’s large lots, custom welded steel gates, long gravel or asphalt drives, and older chain-link farm gates that have been opening and closing for decades. That changes what goes wrong and how we fix it. Our technicians know that a gate off Dick Price Road might have a completely different operator than one off Little School Road, and that the clay under Kennedale behaves like a sponge in spring. When we send someone to your home, we send someone who understands the soil, the gates, and the brands on them. We’ve been doing this since 2009 as part of the Cedarwell family, and the way we work says a lot about why Kennedale homeowners call us back: shoe covers before we walk through your house, drop cloths where we’re working, and a photo of the clean-up before we leave. That’s the C.A.R.E. routine on every single visit, not an add-on.
You’ll also hear a straight answer on price. Every repair starts with a written quote, so you know the number before any work begins. If it’s not done right, our 365-Day Done Right Promise means we make it right. No argument, no fine print. That’s the standard Cody Beckman set for our techs, and it’s why families in Kennedale with kids and dogs trust us to work on the very thing that keeps them safe.
Styles & brands we work with
Commercial Gate Operator in Kennedale
Commercial Gate Operator problems in Kennedale usually show up two ways: either the gate won’t move at all, or it’s grinding and groaning like it’s about to give up. For a homeowner with a heavy ornamental steel gate, you might have a commercial-grade operator without even realizing it. These units are built to move serious weight, but they’re finicky about alignment. When a Kennedale clay soil shift knocks a post out by half an inch, the operator pushes against that resistance every single cycle until it trips a force error or burns a capacitor. We see this regularly on custom estate gates across the acreage lots here.
What a Commercial Operator Repair Actually Involves
We start by isolating the problem: is the operator failing, or is the gate fighting the track? In Kennedale, it’s usually both. A heavy swing gate that drags will push a Linear or DoorKing commercial operator past its limits. We reset the post, correct the sag, align the photocells, and tune the limits so the motor isn’t working harder than it was built to. Most commercial operator repairs in Kennedale run from $380 to $890, and the written quote you get up front locks that number in.
Underground Operators and Precision Alignment
Underground operators power some of the high-end ornamental gates around Kennedale, and they demand a level of precision that’s hard to overstate. The gearbox sits below grade, so a shifting post or a settling concrete pad directly affects how smoothly it runs. We dig, reset, re-pour, and get the geometry right, because a bespoke gate that weighs 800 pounds needs to feel like it weighs 20.
Gate Opener Repair in Kennedale
Gate Opener Repair in Kennedale comes down to age and weather. The hot, humid summers here are rough on chain-driven swing motors, which overheat and trip their thermal protection right when you’re trying to leave for work. Winter freezes do their own damage, cracking plastic gear housings and shorting control boards. We replace motors, gears, limit switches, and control boards across all the major brands, and we keep the parts on the van that we know Kennedale gates actually use. A typical opener repair here runs between $180 and $390, with the exact number on paper before we start.
When the Opener Runs but the Gate Doesn’t Move
That’s almost always the drive: a stripped plastic gear, a snapped chain, or a coupler that’s rounded off. It’s a common repair, doesn’t require replacing the whole operator, and it shouldn’t cost you the price of a new unit. On older chain-drive openers, a new gear assembly and a fresh trolley often give that gate another five to seven years.
Sensors, Limits, and the Stuff That Trips You Up
Kennedale’s thunderstorms throw fine dust and oak pollen onto safety photocell lenses all spring. When the sensors get dirty, they false-trigger, and the gate reverses or refuses to start. That’s a maintenance item, not a replacement, and we clean, test, and re-align them as part of most opener repairs. If a loop detector under the drive is cracked from soil movement, that’s a different job, and we’ll show you what we found before doing anything.
Trusted Brands We Service in Kennedale
Our techs are factory-trained and carry field experience on the brands Kennedale homeowners actually have: Linear, Viking, Ghost Controls, and DoorKing show up on jobs out here every week, along with LiftMaster, FAAC, BFT, Mighty Mule, and Elite. Because we focus only on gates, we stock common boards, gears, remotes, and photocells so a repair out here isn’t waiting two days on a part from a warehouse. When you call about an opener that’s whining, we bring the likely fix with us on the first trip.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Kennedale Homes
- Post heave after heavy rain. Kennedale sits on expansive clay that swells when it gets wet. Older neighborhoods off Mansfield Cardinal Road have gate posts with shallow concrete footings, and after a big spring storm the post shifts just enough to bind slide gate tracks or make a swing gate drag. The opener works harder, overheats, and trips. We reset posts with deeper footings and re-align the leaves so the motor isn’t fighting the ground.
- Motor overheating in peak summer. July and August in Kennedale push older chain-driven gate motors to their thermal limit. A gate that runs fine in the morning chokes by 4 p.m. The fix is often a replacement motor with better ventilation, or a conversion to a belt-drive or solar unit for gates at the far end of long driveways.
- Dust and storm debris on sensors and racks. High winds from spring thunderstorms coat slide gate racks and photocell lenses with a film that causes false obstructions and reversing gates. We clean, test, and re-align these as part of regular seasonal maintenance, which costs less than replacing a board that wasn’t actually bad.
- Worn hinge posts on custom ornamental gates. The heavy ornamental steel gates that front many Kennedale estate properties put enormous stress on hinge posts. When a post is undersized or corroded at the base, the gate sags, scrapes the ground, and eventually stresses the operator into a fault. We weld, shim, reinforce, and re-set posts so the gate carries its weight cleanly.
Pricing for Electric Gate Repair in Kennedale, TX
Here are the straight numbers we quote for Kennedale work. A basic gate opener repair, like a stripped gear or a limit switch, runs $180 to $390. Motor replacements land between $240 and $560 depending on the operator type. Commercial operator repairs run from $380 to $890, and that includes post resetting and photocell alignment when the job calls for it. Keypad, remote, and safety sensor replacements typically range from $90 to $260 installed. Every quote is written before the work starts, so the price you approve is the price on the invoice. Factors that move the number: the weight of the gate, the condition of the post footings, and whether we’re repairing or replacing the operator. Call (682) 841-5749 and we’ll give you an exact figure after a quick look, not a vague range.
We Also Serve Cities Near Kennedale
Our crews work Kennedale daily, and we also run calls into Kennedale‘s neighboring communities including Arlington, Fort Worth, Haltom City, and Hurst. If you’re just outside town on the Arlington side or out toward the Hurst line, the same written pricing and same-day service apply. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, but the technician who shows up knows Kennedale gates specifically.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Kennedale
Because rain in Kennedale doesn’t just soak the ground, it swells the expansive clay under your gate posts by several inches. That movement racks the gate enough to make the opener work against a bind, which trips the force sensor or blows the capacitor. The fix is resetting the post with a deeper, concrete footing and re-aligning the gate so the opener isn’t dragging metal over resisting ground. Call (682) 841-5749 and a live person will schedule a time that works for you, rain or shine.
In Kennedale it’s usually a hinge post problem first and an operator problem second. A shifting or undersized hinge post lets the gate sag, and the sag puts constant load on the operator until it faults or burns out. We correct the post, re-shim or weld the hinge mount, set the gate’s geometry, and then re-tune the operator’s limits so it runs quiet. That’s the sequence that makes the repair hold. If you’re seeing this on your gate, a free estimate will tell you exactly what we found and what it costs to fix.
Yes, all automatic gates are required to have functioning entrapment protection, usually photo eyes, reversing edges, or both, and our repair work restores them to compliance before we leave. On older Kennedale farm-style gates, we often find bypassed or dead sensors. We test each one, replace what’s failed, and verify the gate reverses under pressure. It’s part of the written price, not an add-on.
Yes, and for many long Kennedale driveways where running conduit from the house to the gate costs more than the opener itself, a solar kit from Ghost Controls or Viking paired with a deep-cycle battery is the practical answer. We spec the panel and battery for your gate’s weight and cycles, mount the system, and upgrade the operator to a more efficient DC motor. Most solar conversions in Kennedale run between $1,100 and $2,800 depending on gate size and run length, and the written quote covers everything before we start.
The most likely cause is clay soil heave binding the track. When the ground swells, even a quarter inch of shift can wedge the gate rollers against the rail and stop the whole assembly. We reset the posts, relevel the track, and free the gate before the operator gets damaged. If you’re off Mansfield Cardinal Road or any of the older Kennedale roads, we can be there the same day. Call (682) 841-5749 and we’ll walk you through what we’re checking before we even arrive.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fort Worth, serving Kennedale and the Dallas-Fort Worth metro since 2009.