Gate Access Control Cost - What It Actually Costs, Quoted Free

Wrought iron

Wood & steel frame

Farm & ranch

Sliding driveway gates

LiftMaster operators

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Explore

Styles & brands we work with

01Wrought iron02Wood & steel frame03Farm & ranch04Sliding driveway gates05LiftMaster operators

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

How Much Does Gate Access Control Cost in Fort Worth?

Gate access control installation in Fort Worth typically costs between $1,800 and $6,500 for a complete system on a single-family residential gate. Most homeowners in neighborhoods like Tanglewood, Wedgwood, and Ridglea Hills pay around $3,200 for a quality keypad or intercom setup with electric gate hardware, installed and programmed the same day.

That number includes the keypad, magnetic lock or gate opener, wiring, power supply, and labor. It does not include the gate itself if you’re installing one from scratch. For a gate that already exists and just needs access control added, expect the lower end of that range. For a full system with video intercom and smartphone control, expect to move toward $5,000 to $6,500.

We’ll walk through the exact line items below so you can see where the money goes, what’s worth paying for, and what you can skip in the Fort Worth climate.

Key Takeaways

• Complete gate access control in Fort Worth runs $1,800 to $6,500 for most homes, with $3,200 as a realistic midpoint.
• Entry-level keypad systems start around $450 to $900 for hardware, plus $150 to $400 for a half-day of labor.
• Smartphone-controlled systems add $800 to $1,800 over a standard keypad.
• Fort Worth’s clay soil and summer heat affect gate alignment and wiring longevity more than cold-weather damage.
• Most installations take 4 to 8 hours, and same-day service is realistic if you call before mid-morning.
• Latch & Post Gate Repair gives you a written price before any work begins. The phone call and the estimate are free at (682) 841-5749.

Gate Access Control Cost Breakdown (2026)

Here’s what a typical gate access control job looks like in Fort Worth, item by item. These are real numbers from local installations we’ve done across the city. Your exact quote will depend on your gate’s condition, the distance from your house to the gate, and which features you want.

So how does that shake out in real terms? A basic keypad added to an existing gate with a working opener typically lands between $1,800 and $2,600. A full setup with video intercom, smartphone control, and a new gate opener will run $4,500 to $6,500. Most folks in Fort Worth fall somewhere in the middle.

What drives the number up or down? The age of your existing gate opener is a big one. If it’s more than 8 to 10 years old, you may need a new control board to talk to modern access hardware. That adds $300 to $700. The distance from the house to the gate affects wiring cost. And whether you want a simple keypad versus a full video system changes the hardware portion quickly.

Every gate comes down to two parts: the latch that holds it and the post that carries it. When we install access control, we check both because a keypad on a drifting gate is a keypad that stops working in six months. We’d rather tell you that up front than have you back on the phone with us later.

What Affects Gate Access Control Pricing in Fort Worth

• Distance from the house to the gate. Running low-voltage wire 40 feet costs a fraction of running it 250 feet. Some properties in Monticello or along the Trinity River have gates set far back from the house. That’s more wire, more conduit, and more trenching, or a cellular unit that costs more for hardware but less for labor.
• Gate type: swing vs. slide. A sliding gate typically uses a different opener and may need a separate track system. Slide gate hardware runs $200 to $600 more than swing gate hardware on average across Fort Worth installs.
• Whether an electric gate opener already exists. Adding access control to a gate with a working opener is straightforward. If we’re adding the opener too, the job grows. If your gate is manual only, budget an extra $900 to $2,500 for the opener itself.
• Fort Worth’s clay soil and summer heat. The soil here expands and contracts hard. Gate posts shift, hinges bind, and then the access control wiring starts getting pinched or pulled. We frequently reinforce posts or adjust hinges in neighborhoods where the soil is particularly active. It’s a $150 to $500 add-on that prevents a bigger repair later.
• Power availability at the gate. Some gates have no power run to them. That means either trenching a power line or going solar. Solar access control setups cost $200 to $450 more in hardware but save the trenching cost, which can run $800 to $2,000 depending on the route.
• Number of users and codes. A single family with one gate code is simple. A house with a nanny, a pool cleaner, a dog walker, and grandparents each wanting their own code or fob means more programming and more hardware. Most systems we install handle 25 to 100 users, but each additional key fob is a line item.

Repair vs. Replace: What Makes More Sense in Fort Worth?

If you already have gate access control and it’s acting up, repair is usually cheaper than replacement. In the Fort Worth market, a diagnosis visit with repair runs $150 to $450 for most common issues: a failed keypad, a corroded wire connection, a misaligned sensor, or a bad relay. A full replacement of just the keypad or intercom unit lands in the $450 to $1,800 range depending on what you have.

Here’s the honest math. If your existing system is more than 12 to 15 years old and the control board fails, replacement often beats repair. Older boards are hard to source and the labor to retrofit them runs close to the cost of new equipment. But if the issue is a worn keypad or a loose wire, repair is the clear choice. We’ll tell you which one makes sense for your gate, and you’ll see the written price before we do anything.

We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your existing access control is from one of those brands, we almost certainly have the part on the truck. That’s part of the reason our first-visit fix rate is high. We’re not general handymen guessing at your gate. We’re gate access control specialists in Fort Worth who work on these systems every day.

How to Save on Gate Access Control

There are a few ways to keep the number down without cutting corners that you’ll regret in July when the gate won’t open and the AC repair guy is waiting on the other side.

Choose a keypad first, upgrade later. A basic keypad system at $1,800 to $2,500 gets you secure entry now. Most systems we install can accept a video intercom or smartphone module later. You don’t have to buy everything on day one.

Bundle the work. If you need gate repair anyway, adding access control during a repair visit saves you a second trip charge and gives us a chance to inspect the whole setup while we’re there.

Check your gate alignment before you call. If your gate sags or scrapes, we’ll need to address that before access control goes in. Having a rough sense of the gate’s condition helps you price the job accurately over the phone.

Ask about battery backup strategically. Battery backup is worth the $150 to $250 it costs, especially in North Texas storm season. But if you’re on a tight budget, it’s one of the few line items you can defer. Keystrokes will still work; the opener just won’t run during a power outage.

One thing that costs you nothing: the estimate. Call (682) 841-5749 and our Fort Worth team will talk through your setup, give you a realistic price range over the phone, and schedule a visit with a written price before any work starts.

What to Expect During Installation

Here’s the step-by-step for a typical gate access control installation in Fort Worth, so you know what the day looks like. This is the same routine we follow on every job.

1. Phone call and initial estimate. You call (682) 841-5749. A live person answers, 24/7. We ask about your gate type, your existing opener, the distance from house to gate, and what features you want. You get a rough price range on the spot.
2. Site visit and written quote. A technician comes out, checks the gate’s alignment, opener condition, power availability, and wiring path. You get a written price before any work begins. No pressure, no vague verbal numbers. If you decline, that’s fine. The visit still happens on schedule and the quote is yours to keep.
3. Installation. We mount the keypad or intercom, run wiring, install the power supply, and connect everything to your gate opener. We wear shoe covers and drop cloths inside if we need to access an interior control panel. Pets stay safe because we ask before opening any gate or door.
4. Programming. We set up your codes, test every fob and card, and walk you through adding or removing users. If you want smartphone control, we pair the app and test remote open/close from your phone.
5. Cleanup and photo. We clean up the work area, put everything back where it was, and take a photo of the finished cleanup before we leave. You’ll see exactly what we see.
6. Documentation. You get a walkthrough of what was installed, what it cost, and how to reach us if anything acts up. Every job is covered by the 365-Day Done Right Promise. If it’s not right, we make it right. No argument, no fine print.

You can call us at any point in that process. A live person answers. That’s not a marketing line; that’s how the phone gets answered.

Why Gate Access Control Matters in Fort Worth

A gate without access control is just a fence with a hinge. The access control is what lets you stay inside while the delivery driver drops a package, the lawn crew comes through, or your teenager gets home at midnight without you standing at the front door.

Fort Worth spreads out. Driveways here run long, and a lot of homes sit on oversized lots where the gate isn’t visible from the house. In neighborhoods like Meadowbrook or the newer developments west of Loop 820, a gate at the driveway’s end can be 100 to 200 feet from the back door. An intercom or smartphone-connected keypad means you know who’s at the gate without walking out to check. For families with kids and dogs, that’s a genuine daily convenience, not a luxury add-on.

We also see a lot of older gates in Fort Worth that were installed with no thought to access control. The gate works fine manually, but the homeowner is tired of getting out of the car in the rain or after dark. Adding a keypad or fob system to an existing gate is one of the most common jobs we do, and it’s often less expensive than people expect.

If the gate itself is in rough shape, we’ll tell you that too. It makes no sense to mount $1,200 in electronics on a gate that’s falling off its hinges. The fix comes first, then the access control. That’s the order that saves you money long term.

Fort Worth Climate and Your Gate System

North Texas weather is hard on outdoor electronics in specific ways. The summer heat here bakes keypads and control boards. Direct afternoon sun on a west-facing gate in July can push surface temperatures past 140 degrees. We recommend shaded mounts or small sun hoods for keypads on exposed gates. It’s a $40 to $80 add-on that doubles the lifespan of the keypad face.

Spring storms bring lightning and power surges. A surge protector on the power supply costs about $60 to $120 and protects the control board from the kind of spike that fries $800 worth of electronics. If you’re in an area with frequent outages, the battery backup I mentioned earlier becomes less optional.

And then there’s the soil. Fort Worth’s clay expands when wet and contracts when dry, which shifts gate posts more than people realize. We shim and resecure posts all the time. A gate that moves 2 inches at the latch can throw off a maglock’s alignment or make a swing gate opener strain. That strain shortens the opener’s life and raises your long-term costs. Fixing the post first is the difference between a system that lasts 5 years and one that lasts 15.

FAQs – Gate Access Control Cost

How much does a basic gate keypad cost in Fort Worth?

A basic wireless keypad for a single gate runs $450 to $900 for hardware, plus $150 to $400 for installation. Most complete keypad installs on an existing gate land between $1,800 and $2,600 when you include the power supply, wiring, and programming. Call (682) 841-5749 for a written quote on your specific gate, free.

Can I add smartphone control to my existing gate opener?

Usually yes, for $600 to $1,400 in hardware and programming. That assumes your opener is compatible with a smartphone control module. Works with LiftMaster MyQ, Ghost Controls, BFT, and several other brands we service. If your opener is older, the control board may need upgrading for $300 to $700. We’ll tell you exactly what your setup needs before we touch anything.

How much does a video intercom for a gate cost in Fort Worth?

A video intercom system for a residential gate runs $1,500 to $3,200 installed, including the camera unit at the gate, the inside monitor, wiring, and programming. Homes where the gate is far from the house or not visible from any window typically need the higher end of that range. Estimates are free; call (682) 841-5749.

Is it cheaper to repair or replace gate access control?

Repair is cheaper for most issues, running $150 to $450 for common fixes like a failed keypad, corroded wiring, or a bad relay. Replacement makes sense when the system is more than 12 to 15 years old or the main control board has failed. A full replacement typically runs $1,800 to $4,500 depending on features. We’ll give you a straight answer on which path costs less for your situation.

How long does gate access control installation take?

Most installations take 4 to 8 hours on site. That includes mounting, wiring, programming, testing, and cleanup. If your gate needs repair or post work first, add an hour or two. We can often schedule within a few days, and same-day service is sometimes available if you call early in the morning. The phone is answered by a live person 24/7 at (682) 841-5749.

Do I need a permit for gate access control in Fort Worth?

For most residential gate access control work on an existing gate, no permit is required in Fort Worth. If you’re installing a new gate or making significant structural changes, a permit may apply. We’ll let you know during the site visit if your project needs anything from the city. The estimate covers it either way, and you’ll see the full written price before work begins.

Free Estimates from Latch & Post Gate Repair Fort Worth

We’re Cody Beckman’s team at Latch and Post Gate Repair Fort Worth, part of the Cedarwell family of gate specialists. We’ve been doing this work since 2009, and we focus on one thing: gates. Not fences, not general contracting, not “we also do sprinklers.” Just the latch that holds the gate and the post that carries it.

When we come to your home, we follow the Cedarwell Care Promise: a written price before any work starts, shoe covers and drop cloths if we step inside, and a cleanup photo before we leave. We ask before we move or touch anything. We respect quiet hours if you’ve got a sleeping baby. And we explain the price before the first tool comes out.

If you’re thinking about gate access control in Fort Worth, call us first. You’ll get a real person on the phone, a straight answer on price, and a free on-site estimate with no obligation. (682) 841-5749. We answer 24/7.

Pricing reflects the Fort Worth market as of 2026. Latch and Post Gate Repair Fort Worth offers free estimates – call (682) 841-5749.

Written by Cody Beckman, Owner at Latch and Post Gate Repair Fort Worth, serving Fort Worth since 2009.