Gate Installation Cost - What It Actually Costs, Quoted Free

How Much Does Gate Installation Cost in Fort Worth?

Most homeowners in Fort Worth will pay between $1,800 and $7,500 for a full gate installation in 2026, with the typical driveway gate landing around $3,200 to $4,800. Walk gates run substantially less, usually $700 to $2,500, while custom ironwork or automated systems with long runs of conduit can push past $12,000. These numbers include materials, labor, and hardware; the exact figure depends on the gate’s width, material, automation, and how much prep the site needs.

If you want a straight answer before anyone touches your property, that’s how we work at Latch and Post Gate Repair. You get a written price before work starts, every time, no pressure to accept it.

Key Takeaways

• Average gate installation in Fort Worth runs $1,800 to $7,500 for most residential jobs.
• Driveway gates cost more than walk gates; automated gates add $800 to $3,000 for opener and safety devices.
• Fort Worth’s clay-heavy soil often requires deeper post footings, which adds labor compared to other Texas markets.
• Steel and aluminum are the most common materials in Tarrant County; wrought iron runs 20 to 30 percent higher.
• Latch and Post Gate Repair provides a written price before starting and backs every installation with the 365-Day Done Right Promise.

Gate Installation Cost Breakdown (2026)

Here’s what our team sees across Fort Worth, from Ridglea Hills to Saginaw to Benbrook. These are real numbers from the 2026 market, not national averages pulled from a database.

Item	Typical Cost Range	Notes
Single walk gate (wood, 4 ft)	$700 to $1,400	Includes hinges, latch, and two posts
Single walk gate (steel or aluminum, 4 ft)	$900 to $2,200	Powder-coated finish; most common in HOA-governed neighborhoods
Driveway gate, single swing (12 ft)	$2,800 to $4,600	Steel frame with pickets; manual operation
Driveway gate, double swing (16 ft)	$4,200 to $7,500	Two leafs, heavy-duty hinges, T-post or full frame
Automation (opener + safety devices)	$1,200 to $3,200	Includes swing or slide operator, photo eyes, keypad
Slide gate (single, 15 ft)	$3,500 to $6,800	Needs a track or cantilever system; common on longer driveways
Custom wrought iron driveway gate	$6,000 to $14,000+	Hand-finished, often heavier; lead times run 4 to 8 weeks
Post replacement (each)	$350 to $900	Includes concrete footing; deeper in Fort Worth clay
Concrete pad or foundation work	$400 to $1,800	For slide gates or unstable ground

Those ranges reflect what we quote on a weekly basis. The gap between the low and high end comes down to three things: the weight of the gate, what the posts are anchored into, and whether power needs to be run to the gate location.

One thing worth knowing about Fort Worth specifically: our soil moves. The clay under much of Tarrant County expands when wet and contracts in drought, which means posts set at the minimum 30-inch depth can drift over time. We set footings deeper than code minimums on most driveway gates, usually 36 to 42 inches, and that extra concrete and labor shows up in the price. It also means your gate still swings true three summers from now.

For a complete breakdown of what’s included on a full install, see our Gate Installation in Fort Worth page.

What Affects Gate Installation Pricing in Fort Worth

• Gate width and weight. A 10-foot steel driveway gate might weigh 250 pounds; a 16-foot double gate doubles that plus the hardware. Steel thickness, picket count, and whether the frame is welded or bolted all move the number.
• Material choice. Treated cedar gates run lower upfront but need staining every two to three years in Texas sun. Powder-coated aluminum costs more at installation but holds up better to Fort Worth’s UV exposure and hail seasons. Wrought iron is the premium option, and it’s the one we see most often in neighborhoods like Monticello and Berkeley Place.
• Soil and footing depth. As mentioned, Fort Worth’s clay soil means deeper footings for anything heavier than a basic walk gate. If the site has tree roots, old concrete, or utility lines near the post locations, that’s more time and more cost.
• Automation components. An opener is just one part of the system. A complete automated gate includes photo eyes, an edge sensor or reverse loop, a keypad, possibly an intercom, and a battery backup if you want the gate to work during power outages. Each of those pieces adds $150 to $500.
• Access to the site. A gate at the front of a flat driveway is straightforward. A gate at the back of a narrow side yard, behind landscaping, with no room to dig postholes by machine, takes longer. Labor is the largest single line item on most quotes.
• Permits and HOA requirements. Fort Worth itself does not require a permit for a basic residential gate on private property, but many neighborhoods with deed restrictions do. Some HOAs in the Alliance area and Walsh Ranch specify materials, colors, and even hinge directions. We ask about your HOA on the first call so the quote reflects reality.

How to Save on Gate Installation

You don’t have to compromise on safety or looks to keep the number reasonable. Here are the levers we tell friends and family to pull.

1. Choose the right material for the long game. A cedar gate might save $600 today, but if it needs replacing in six years while an aluminum gate would have lasted twenty, the cheaper gate costs more. We’ll show you the math in writing before you decide.
2. Prep the site yourself where it’s safe and practical. Trimming overhanging branches, clearing old gate remnants, and moving potted plants off the work area can save an hour or two of labor. Leave the heavy lifting and anything involving posts to us.
3. Phase the automation. You can have the gate installed manually now and add the opener, keypad, and battery backup next year. The gate gets built with automation in mind from day one, so the retrofit is clean and costs less than doing both separately.
4. Get the post depth right the first time. This sounds obvious, but a gate installed on shallow footings in Fort Worth clay will sag within 18 months, and then you’re paying for a second visit plus new concrete. A small upfront cost prevents a larger one later.
5. Ask for a written estimate. You should never accept a verbal number and hope it holds. Latch and Post Gate Repair provides a written price before any work begins, and that’s the price you pay unless the scope changes and you approve it in writing first.

Call (682) 841-5749 for a free, no-pressure estimate. You’ll get a straight answer, a written price, and no obligation.

Gate Installation Costs by Material in Fort Worth

Material choice is the single biggest cost driver, outside of size and automation. Here’s how the numbers break down in the Fort Worth market for a standard 12-foot driveway gate.

Steel Gates: $2,800 to $4,600

Steel is the workhorse. It’s strong, usually the most affordable of the metal options, and takes powder coating well. The tradeoff is weight and rust potential. In Fort Worth’s humid shoulder seasons, steel needs good edge protection and regular inspection at the welds. A powder-coated steel gate with stainless steel hardware should hold up for 15 to 20 years when installed correctly.

Aluminum Gates: $3,200 to $5,500

Aluminum runs 15 to 20 percent higher than steel, but it doesn’t rust, which matters when your gate faces a street where sprinklers hit it twice a week. It’s lighter too, which puts less strain on hinges and openers. For families who want a gate that stays looking clean without much maintenance, aluminum is usually our recommendation.

Wood Gates: $1,200 to $3,500

Cedar is the most common wood for Fort Worth gates because it resists rot better than pine and takes stain well. A well-built cedar Pedestrian Gate can last 8 to 12 years with staining every two years. For driveway gates, wood is less common because of the weight and the maintenance. We do build them, usually for homeowners matching a craftsman or prairie-style house where wood is the visual anchor. Just know that the Texas sun is hard on wood, and your staining schedule is a real commitment.

Wrought Iron Gates: $6,000 to $14,000+

True wrought iron is increasingly rare and usually custom. What most people call wrought iron is actually hand-forged steel made to look traditional. These gates are heavy, beautiful, and expensive. Each one is built to the home’s specific dimensions, often with scrollwork or custom finials. Lead times run 4 to 8 weeks. If you’re in Mistletoe Heights or Park Hill and want something original, this is the tier we talk through carefully, because the cost difference between “nice metal gate” and “custom hand-forged ironwork” can be $5,000 or more.

Automated Gate Installation: What the Opener Actually Costs

The gate itself is only half the equation if you want it to open by remote. Here’s what automation adds in Fort Worth.

A basic single-gate opener starts around $1,200 installed. That includes a swing arm from a brand like LiftMaster, BFT, or FAAC, plus the control board and two remotes. But a safe automated gate needs more than a motor.

Photo eyes, which stop the gate when something crosses the path, add $200 to $350. An edge sensor on the gate leaf adds another $150 to $250. A keypad for access runs $150 to $300. A battery backup, so the gate works when the power goes out, is $250 to $500 depending on capacity. Intercom systems for visitors start around $400 and go up from there, especially for video options.

All in, a fully automated driveway gate in Fort Worth typically lands between $5,000 and $10,000 including the gate itself. Our technicians are factory-trained on the brands families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That’s not a list we memorize; it’s the list of equipment we service and install every week.

Why Some Fort Worth Quotes Are Much Higher or Lower

You’ll see quotes for the same size gate that differ by $2,000 or more. That’s not always a red flag. Here’s what explains the spread.

Lower quotes usually come from operations with less overhead, which can be fine for a simple walk gate. But they may also skip things like deeper footings, concrete mix rated for clay soil, or safety devices on automated gates. Those omissions don’t show up on day one. They show up 14 months later when the gate drags or the opener won’t hold limits.

Higher quotes often include things that should be standard, like stainless hardware, a concrete footer below the frost line (less relevant in Fort Worth than up north, but still relevant for clay movement), and a proper conduit run for future automation. They may also reflect a brand-name gate from a manufacturer with a real warranty, not a welded-together frame from a supply yard.

The best way to evaluate the difference is to look at what’s written down. A quote that says “12-ft steel gate, installed” tells you almost nothing. A quote that says “12-ft powder-coated steel gate, 2×2 frame, 14-gauge pickets, stainless hinges, 36-inch footings, photo eyes, LiftMaster LA412 operator, permit coordination, debris removal” tells you exactly what you’re paying for.

Our quotes at Latch and Post list line items. You see what the gate costs, what the hardware costs, what the operator costs, and what labor is required. No mystery, no “installation and materials” lump sum.

How the Installation Process Works at Latch and Post

Every job follows the same steps, and you’ll know where you are in the process from the first phone call to the final walk-through.

1. Call and describe the gate. A live person answers 24/7, even on weekends and holidays. You tell us what you want: gate size, material, manual or automated, and where it sits on your property.
2. We visit and measure. A background-checked, uniformed technician comes out, measures the opening, checks soil conditions, and notes any obstacles like utilities, slopes, or drainage lines.
3. You receive a written price. Before any work starts, you get a line-item written quote. You approve it in writing or you don’t, and both are fine. There’s no pressure, no “today only” pricing.
4. We install on schedule. Our crew shows up on time, lays drop cloths inside the home where needed, puts on shoe covers before stepping onto your floors, and keeps tools quiet when someone is sleeping. We use pet-safe lubricants wherever there’s a choice.
5. Cleanup and photo. Before we leave, we take a photo of the clean work area and show it to you. The gate is tested through full open and close cycles with you watching, and we walk through any automation settings.
6. 365-Day Done Right Promise. If the installation isn’t right, Latch and Post makes it right. No argument, no fine print, for a full year.

Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on, and it’s why we’re called Latch and Post.

Fort Worth Neighborhood Notes on Gate Installation

We’ve installed gates all over Fort Worth and the surrounding area, and each part of town has its own patterns.

Ridglea, Tanglewood, and Overton Woods: Homes here are older, often with established trees near the property line. Roots make posthole work slower, and some lots have narrow side yards that limit access. Budget 10 to 15 percent more on labor for these areas.

Walsh Ranch and Alliance: Newer construction, but HOAs are detailed. Most require architectural review before a gate goes up, and some specify gate height, color, and even whether it can be automated. We ask about your HOA documentation on the first call and factor the review timeline into the schedule.

Benbrook and the southern edge: Larger lots, longer driveway runs, and more slide gates. A slide gate costs more than a swing gate in most cases because of the track or cantilever system, but it saves space on a long driveway where a swing gate would need too much setback.

Near Southside and Fairmount: These historic neighborhoods have stricter aesthetic guidelines. Many homes here have walk gates that match the house style, and the right material matters more than raw cost. Cedar and traditional ironwork are common.

No matter where you are in Fort Worth, you’ll receive the same care routine: written price first, shoe covers and drop cloths inside, quiet tools, and a cleanup photo before we leave.

FAQs – Gate Installation Cost

How much does it cost to install an automatic gate in Fort Worth?

An automatic driveway gate in Fort Worth typically costs $5,000 to $10,000 all-in, including the gate, opener, safety devices, and installation. The automation components alone add $1,200 to $3,200 on top of the manual gate price. Call (682) 841-5749 for an exact quote on your specific gate, width, and opener preference.

Is it cheaper to install a manual gate and automate it later?

In most cases, yes. You’ll save the $1,200 to $3,200 automation cost upfront by installing a manual gate now, and we can pre-run conduit and leave space on the post for a future operator, which makes the later retrofit cleaner and about 20 percent cheaper than a full automation installation done from scratch. We’ll include that prep in the initial quote if you ask.

How long does gate installation take in Fort Worth?

A standard walk gate takes one day. A manual driveway gate usually takes one to two days. An automated driveway gate, especially with a slide track and electrical work, typically runs two to three days. Custom wrought iron gates have a 4-to-8-week fabrication lead time before installation begins, but the on-site work is still done in one or two days.

Do I need a permit for a gate in Fort Worth?

The City of Fort Worth does not require a permit for a basic residential gate on private property. However, many neighborhoods with HOAs require architectural review before installation. We ask about your HOA on the first call and can help you navigate the review documents if needed.

What’s the most common gate material in Fort Worth?

Powder-coated steel and aluminum are the most common materials we install, with steel making up roughly 60 percent of driveway gates and aluminum growing quickly because it resists the rust and hail damage that steel is prone to. Steel driveway gates run $2,800 to $4,600; aluminum runs $3,200 to $5,500 for the same size.

How much does it cost to repair a gate instead of replacing it?

Gate repair in Fort Worth usually runs $150 to $900 depending on the problem. A latch replacement might be $150 to $350, a hinge replacement $200 to $450, and a sagging gate with post issues $600 to $1,200 if new concrete is needed. If repairs would cost more than half the price of a new gate, we’ll tell you that in writing and let you decide.

For a full look at what’s involved in a new installation, visit our Gate Installation in Fort Worth page or return to the home page to see all our services.

Get a Straight Answer on Your Gate Installation

You don’t need to spend another hour searching for pricing that might not apply to your home. Call Latch and Post Gate Repair Fort Worth at (682) 841-5749 and you’ll get a live person, every time, day or night. We’ll talk through your gate, your budget, and your timeline, then schedule a visit where you receive a written price before anything is touched.

Our technicians show up in uniform, background-checked, and trained on the brands families actually own. They’ll put on shoe covers before stepping inside, lay drop cloths where they’re working, and hand you a cleanup photo before they leave. Your floors stay clean. Your pets stay unharmed. Your kids can keep napping through the whole thing.

Every installation is backed by the 365-Day Done Right Promise. If it isn’t right, we make it right. That’s the deal, and it’s been the deal since 2009 as part of the Cedarwell family.

Written by Cody Beckman, Owner at Latch and Post Gate Repair Fort Worth, serving Fort Worth since 2009.

Pricing reflects the Fort Worth market as of 2026. Latch and Post Gate Repair Fort Worth offers free estimates – call (682) 841-5749.