Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterPedestrian Gate in Fort Worth, TX
A pedestrian gate is the walk-through gate next to your driveway gate, the one your kids use to get to the front door and your dog watches from the side yard. In Fort Worth, these gates take a beating from the summer heat, heavy clay soil that shifts with every rain-dry cycle, and the occasional north wind that slams them against the post. Latch and Post Gate Repair Fort Worth installs and repairs pedestrian gates from Gate Installation in Fort Worth to simple fence-line walk gates across Tarrant County. We’re the Cedarwell family’s gate specialist, not a general handyman, so every pedestrian gate job gets a written price before work starts, shoe covers and drop cloths on every visit, and a cleanup photo before the technician leaves. Call (682) 841-5749 for a free estimate, day or night.
Key Takeaways
- A standard pedestrian gate installation in Fort Worth runs $450 to $1,400 depending on size, material, and post condition.
- Most latch and hinge repairs are finished in under two hours.
- Every job includes a written price upfront and the 365-Day Done Right Promise.
- A live person answers our phone 24/7. No voicemail, no callback queue.
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. A sagging pedestrian gate in Fort Worth is almost never just a hinge problem. The post has usually started to lean because our clay soil expands in the wet season and contracts hard in August. We see it in Wedgwood, in Ridglea Hills, in Arlington Heights, and out in Benbrook where the soil shifts more than people expect. We set posts in concrete below the frost line and brace the gate frame so it still swings true three summers from now.
When You Need Pedestrian Gate
Sometimes it’s obvious: the gate won’t latch at all. More often it’s quieter. The gate drags a quarter inch every month. The latch needs a shove. The hinge screws have started pulling out of the post. Here’s what we tell Fort Worth homeowners to look for:
- The gate drags on the ground or won’t clear the latch. This usually means the post has shifted in the clay soil or the hinges have sagged. Left alone, the frame warps and the gate gets heavier to fix.
- You have to lift the gate to open it. That’s a hinge and post alignment issue, and every lift puts more strain on the latch. Kids learn to yank it, which makes it worse.
- The latch doesn’t catch without slamming. A soft-close latch or a Ghost Controls magnetic catch solves this. Slamming a gate shortens its life by years in our experience.
- The gate swings open on its own. A self-closing hinge or a proper spring hinge keeps the gate shut, which matters when you have a dog who’s learned to test the gap.
- You’re putting in a new fence and want the walk gate to match. We build pedestrian gates to fit the opening exactly, with the same picket or panel style as the rest of the fence line.
- The gate post wobbles when you push on it. In Fort Worth’s clay, a wobbling post eventually leans hard enough to pull the gate out of square. We pull the post, re-set it in concrete, and re-hang the gate the same afternoon.
Every gate comes down to two parts. When we diagnose a pedestrian gate issue, we look at both the latch and the post before we touch anything. That’s the whole job: the part that holds and the part that carries.
Our Pedestrian Gate Process
We keep the process simple, and we keep it quiet. Here’s what happens when we come to your house in Fort Worth:
- Call and talk to a person. A live person answers at (682) 841-5749, any hour. We ask a few questions about the gate: what’s it doing, what’s the post made of, is there an existing latch or closer. Then we set a visit window that actually works for your schedule.
- On-site walk-through with written pricing. Our technician walks the gate with you. We check the post depth, the hinge mortises, the latch alignment, and the swing path. Then we hand you a written price before any work begins. No pressure. If it’s just a hinge adjustment, that’s what we quote.
- Shoe covers and drop cloths. If we need to come inside the house at any point, we put on shoe covers at the door and lay drop cloths on the floor before we step in. Your floors stay clean. If the gate is strictly exterior, we still protect the flower beds and keep tools off the walkway.
- The fix or the new install. We re-set posts, replace hinges, install latches and closers, or build a new gate to fit the opening. If kids are napping, we bring quiet tools and work around the nap schedule when we can.
- Cleanup photo and a final walk-through. Before the technician leaves, they take a photo of the cleaned-up work area and walk you through what was done. That’s the Cedarwell C.A.R.E. routine: clean up like it’s our own home, ask before we move anything, respect your time, explain the price before the work.
Every pedestrian gate job, whether it’s a new Gate Installation services or a hinge replacement, is backed by the 365-Day Done Right Promise. If it isn’t right, Latch and Post makes it right. No argument, no fine print.
Pedestrian Gate Pricing in Fort Worth
Pedestrian gate installation in Fort Worth typically runs $450 to $1,400. Repairs are usually less: a standard latch replacement runs $90 to $210, and a single hinge replacement runs $75 to $160 per hinge, parts included. A full post re-set in clay soil runs $220 to $480 depending on how deep we need to go and whether the old concrete has to be broken out. You’ll see the exact number in writing before we touch anything.
| Work Item | Typical Range in Fort Worth |
|---|---|
| Standard latch replacement | $90 to $210 |
| Single hinge replacement (parts and labor) | $75 to $160 per hinge |
| Post re-set in concrete | $220 to $480 |
| Full pedestrian gate installation (wood, standard 3-4 ft opening) | $450 to $1,400 |
| Self-closing hinge or spring addition | $120 to $260 |
What moves the price: the post condition (rotten cedar posts cost more to replace than sound steel posts), the gate material, the hardware grade, and whether we need to match an existing fence style. We don’t quote a number until we’ve seen the actual gate and the actual soil, because Fort Worth yards vary street by street. The estimate is free, and it’s always in writing before work begins.
We’re factory-trained on the hardware Fort Worth homeowners actually have, including Mighty Mule and DoorKing closers, Elite hinges, and Ghost Controls latches. That means the right fix on the first visit, not a guess.
FAQs – Pedestrian Gate
How much does a pedestrian gate cost in Fort Worth?
A new Driveway Gate installation in Fort Worth generally runs $450 to $1,400, with most standard 3- to 4-foot wood gates landing between $600 and $900 including hardware and post work if needed. The biggest variables are post condition, material choice, and gate hardware grade. Call (682) 841-5749 for an exact written quote, free of charge.
Can you fix a sagging pedestrian gate the same day?
Yes, in most cases a sagging gate from a shifted post or worn hinge can be corrected the same day, usually in under two hours. If the post itself needs to be re-set in concrete, we may need to let the concrete cure, which can push full swing-testing to the next day. We’ll tell you the realistic timeline in the written estimate.
Is it cheaper to repair a pedestrian gate or replace it?
If the gate frame is still sound and the post is stable, repair is almost always cheaper: a latch replacement at $90 to $210 or a hinge replacement at $75 to $160 per hinge beats a full reinstall at $450 to $1,400. When the post has rotted or the frame has warped past square, replacement starts to make more financial sense. We’ll show you both options in writing and let you decide.
Can you match my existing fence style with a new pedestrian gate?
Yes, we build pedestrian gates to match your existing fence pickets or panels, including cedar, pine, and steel tube styles common in Fort Worth neighborhoods like Ridglea Hills, Wedgwood, and Benbrook. We’ll bring a sample photo to the estimate so you know exactly what you’re getting before we build anything.
Do you install pedestrian gates for pet safety?
Yes, a self-closing hinge or a Ghost Controls magnetic latch keeps a pedestrian gate shut even when someone forgets to pull it fully closed, which is the most common way dogs get out of a yard. We can schedule around your dog’s routine and use pet-safe lubrication on all moving parts.
Ready to get the gate fixed or installed? Call (682) 841-5749 now for a free, written estimate. A live person answers, even at 2 a.m.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fort Worth, serving Fort Worth.