Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Everman
Electric gate repair in Everman usually costs between $185 and $520 depending on whether it’s a sensor realignment, a limit switch adjustment, or a full operator rebuild. Most calls we take from Everman homeowners involve an opener that has worked for years and suddenly stops mid-travel, often because an old post shifted a half inch in the clay soil and threw the travel arc out of square. We know Everman’s houses, its narrow driveways, and the particular way its 1960s-era concrete footings crack. Call (682) 841-5749 and you’ll get a live person, not a queue, any time day or night.
Why Latch and Post Gate Repair Fort Worth Is Everman’s Preferred Electric Gate Repair Company
The gate companies that do best in Everman are the ones that understand its housing stock. Most of the homes here were built between the 1950s and 1970s, and a lot of them still have their original gate frames. That means we’re not usually walking up to a ten-year-old Home Depot panel. We’re working on round-top pickets and pour-in-place concrete footing pads that have been in the ground for sixty years. Those footings crack, the posts lean, and the electric operator that worked fine last year starts binding, stalling, and eating rack and pinion teeth. Our techs see that pattern constantly in Everman, and we fix the underlying post problem rather than just resetting the limit switch and hoping.
Every technician who comes out to Everman is background-checked and uniformed, trained on the equipment families actually have out here: Ghost Controls, DoorKing, Elite, Mighty Mule, LiftMaster, FAAC, BFT, and Linear. Before any work starts you get a written price. Before we step inside your house we put on shoe covers and lay drop cloths. When the job’s done, we send you a photo of the cleanup. That’s the Cedarwell C.A.R.E. routine: clean up like it’s our own home, ask before we move or touch anything, respect your time and quiet hours, and explain the price before the work. Cody Beckman has run our gate repair operation on that promise since we started in 2009, and it’s the reason Everman homeowners who call once tend to call back when the next gate in the family needs help.
Dispatch for Everman is coordinated from our Dallas-Fort Worth office, and crews serve Everman locally. We respond to calls in Everman neighborhoods like the streets off Enon Avenue and the older sections around Harmon Road the same way we respond anywhere in the metro: with a straight time window and a technician who arrives ready to diagnose, not just quote.
Styles & brands we work with
Commercial Gate Operator in Everman
Commercial gate operator work in Everman means keeping a gate that runs dozens or hundreds of cycles a day moving without failure. Even on larger residential lots here, we see slide operators running gates that are heavier than they were designed for, often because a custom ornamental panel was added without recalculating the operator load. A commercial operator rebuild in Everman generally runs $650 to $1,400, depending on whether we’re replacing the motor, the gearbox, or the full operator assembly.
Operator Load Rating and Rebuilds
In Everman, we frequently match operators to gates that were hung decades before the opener was installed. That mismatch shortens the life of the operator. We verify the actual gate weight and measure the travel path before recommending a rebuild, so you aren’t paying for a motor when the real problem is a post that has leaned just enough to add 40 pounds of drag.
Slide Track and Rack Alignment
A slide operator depends on the rack and pinion staying in perfect mesh. On Everman’s clay soil, swollen ground in summer and contracted soil in winter moves the concrete pads enough to compromise that mesh. We re-set the track, re-align the rack, and only then adjust the operator. That order of operations is the difference between a repair that lasts and one you’ll re-book in six months.
Gate Opener Repair in Everman
Gate opener repair in Everman typically costs between $185 and $480, with the most common work being limit switch adjustment, capacitor replacement, and control board swaps on residential swing and slide openers. When a DoorKing or Ghost Controls opener in Everman stops mid-cycle, the cause is usually mechanical drag from a shifted post rather than an electronic failure inside the unit. We test the operator under load before we replace anything, so the repaired opener doesn’t burn out again weeks later.
Limit Switch and Travel Arc Correction
Older Everman gates trip their limit switches because the physical travel arc has changed. The switch is doing its job. We correct the post alignment, true the hinges, and then re-set the limit switch to the corrected path. That’s the fix that lasts. If the motor has already been damaged by repeated stalling, we replace it and note the underlying cause on the work order.
Control Board and Remote Diagnostics
When a remote stops opening the gate from the curb, the board or the receiver is the first suspect. We bench-test the board on-site and replace it only if the signal path is confirmed dead. For keypad and remote failures on properties around Everman Parkway and the residential streets off it, we carry common replacement boards for Mighty Mule, Linear, and DoorKing, so the opener is usually running again the same visit.
Trusted Brands We Service in Everman
We’re factory-trained on the brands Everman families actually have mounted to their gates, and we keep the repair parts for them on the truck when we dispatch to the area. Ghost Controls openers show up a lot on the newer homes around Everman’s south end, while DoorKing and Elite equipment is common on the ornamental gates in the older sections. Mighty Mule is still running on plenty of the chain-link drive gates that date to the 1980s and 1990s. Because we stock local parts for these, a service call to Everman is usually one trip, not three. That matters when your gate is stuck open and your dog is eyeing the street.
Common Electric Gate Repair Problems We See in Everman Homes
- Leaning hinge posts from cracked 1960s concrete footings. The post shifts, the gate’s swing arc changes, and the operator stalls or strips the rack and pinion gear. We reset the post before we touch the operator.
- Rust on lower rails and hinge barrels. Everman’s humidity and hard water accelerate rust on round-top ornamental gates. Frame flex from that rust knocks safety photocells out of alignment, and the gate refuses to close.
- Binding slide gates on narrow lots. Everman’s small setbacks mean oversize custom gates often ride on short tracks. When clay soil movement tightens the clearance even half an inch, the slide operator overloads.
- Failed safety sensors on aging gates. Sensors that worked for years on a straight gate start faulting when the gate sags or twists. We re-aim the sensors to the corrected travel path rather than bypassing them, which keeps the gate compliant with automatic gate safety requirements.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Everman, TX
A straightforward opener repair in Everman, like a limit switch adjustment or remote receiver replacement, runs $185 to $330. Sensor realignment and hinge work on an old ornamental gate typically lands between $240 and $420. A full operator rebuild, where we replace the motor and gearbox on a DoorKing or Elite slide gate, costs $650 to $1,400 depending on the operator’s duty rating and the condition of the rack. Post reset work, where we chip out a cracked 1960s footing and pour a new one, adds $300 to $600 depending on access. You’ll see the exact number in writing before we start, and the price we quote is the price you pay. Call (682) 841-5749 for a free estimate on any repair, and we’ll give you a phone quote range before we even schedule the visit.
Key Takeaways for Everman Homeowners
- Most electric gate failures in Everman start with a shifted post or cracked footing, not a dead motor. Fix the post first.
- Written pricing before work begins, every visit. No exception.
- We service Ghost Controls, DoorKing, Elite, and Mighty Mule, and stock repair parts locally for Everman calls.
- Every job is covered by the 365-Day Done Right Promise: if it’s not right, Latch & Post makes it right.
- A live person answers at (682) 841-5749, 24 hours a day, 7 days a week.
We Also Serve Cities Near Everman
Our Electric Gate Repair team covers Everman and the surrounding area, including Fort Worth, Arlington, Euless, and Hurst. Many of our Everman customers also call us for their parents’ gates in Fort Worth or a commercial property in Arlington, and the same written-price promise and cleanup routine apply on every one of those calls. If you’re just outside Everman proper, call us and we’ll confirm we can get a Everman technician to your street.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Everman
Because the problem is almost never the switch. Your original 1960s gate frame sits on poured concrete footing pads that crack over time. When the pad on the hinge post breaks, the post leans and the gate’s travel arc shifts. The operator stalls and the limit switch trips as a symptom. The lasting fix is to reset the post and true the swing arc before re-setting the switch. Call (682) 841-5749 and we’ll bring a level, measure the post, and tell you exactly what’s moving.
Yes. We regularly mount keypads and small entry cameras on original 1960s and 1970s round-top picket gates in Everman. The keypad gets surface-mounted to the post or the picket itself, the camera can be post-mounted, and the wiring runs inside the post or in a sealed conduit along the frame. You keep the original look of the gate. The photo and entry code integrate with your existing opener brand, whether that’s DoorKing, Elite, or Mighty Mule.
It’s usually the ground, not the track. Everman’s expansive clay soil swells with summer humidity and contracts in drier winter air. That seasonal movement shifts the concrete pad the track sits on, narrowing the clearance just enough to bind the slide. We correct the pad, re-level the track, and realign the rack and pinion. If the operator has been overloaded by the binding, we check the motor windings and drive gear for heat wear while we’re there.
Your gate should have functioning photoelectric sensors or an equivalent contact edge, and the opener should stop and reverse when the beam is interrupted. We inspect this on every repair call without being asked. If a sensor is old, misaligned, or bypassed, we tell you and quote the replacement. A gate that runs without working safety sensors is a liability to every kid and pet on the block, and we won’t leave one in that condition.
Most of the time the post is the problem, not the panel. The round-top picket panels themselves are often still square. It’s the hinge post footing that has cracked and let the post lean outward, which makes the gate sag and drag. We reset the post in a new footing with rebar, restore the gate’s swing plane, and lubricate the hinge barrels. Only if the panel’s own welds have cracked or the lower rail is rusted through do we recommend a panel rebuild. You’ll get a written quote for either scope before any metal is cut.
Call Latch and Post Gate Repair Fort Worth for Electric Gate Repair in Everman
If your gate is stuck, grinding, or refusing to close, call (682) 841-5749. You’ll reach a live person, get a written quote range, and we’ll schedule a technician who knows Everman’s old footings, narrow tracks, and round-top frames. The price you’re quoted is the price you pay. The cleanup is documented. And if anything isn’t right after the repair, the 365-Day Done Right Promise means we come back and make it right, no argument. That’s the only way we’ve ever worked.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fort Worth, serving Everman since 2009.