Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Everman
Gate installation in Everman starts with one honest conversation: what you need the gate to do, how the soil on your lot behaves, and what the finished work should look like from the street. We install driveway gates, pedestrian gates, sliding, swing, double, and security gates across Everman, and we quote every job in writing before any metal is cut. In Everman’s older neighborhoods especially, the ground has more to say about the final result than most people expect. Call (682) 841-5749 and you’ll get a live person, a written price, and a straight answer.
Why Latch and Post Gate Repair Fort Worth Is Everman’s Preferred Gate Installation Company
Everman homeowners call us because we understand what the 1960s housing stock here actually demands. Many lots have narrow driveways, small setbacks, and original poured concrete footings that have been cracking for decades. We don’t show up with a one-size gate and hope it fits. We measure the opening, check the condition of the existing posts, and tell you honestly whether those posts can carry a heavier custom gate or need to be replaced first.
Our crews arrive in uniform, background-checked, and carrying the Cedarwell C.A.R.E. routine: shoe covers before stepping inside, drop cloths on any interior path, and a photo of the clean-up before we leave. Families in Everman don’t have to choose between a functioning gate and a clean house. The 365-Day Done Right Promise backs every installation: if the gate isn’t right, we make it right. No argument, no fine print.
When you call about Gate Installation, you’ll talk to a person, not a queue. Quotes are written and delivered before the work begins, every time. That’s how Cody Beckman has run this crew, and it’s how we work in Everman.
Styles & brands we work with
Gate Opener Installation in Everman
Gate opener installation in Everman means pairing the right operator with a gate that actually suits the lot, not forcing a kit onto an aging frame. We install and service opener systems from Ghost Controls, DoorKing, Elite, and Mighty Mule, and our technicians are factory-trained on each. A typical automatic gate opener installation in Everman runs between $1,400 and $3,200, depending on gate weight, opener type, and whether new wiring or a loop detector is needed. You’ll see the exact number in writing before we start.
Underground Operators for Ornamental Gates
Heavy ornamental swing gates, the kind you see on the larger properties and the nicer corners of Everman, don’t love surface-mounted arms. Underground operators hide the mechanism below grade and give a clean look. The catch in Everman is drainage: our clay soil holds water, and a poorly drained underground operator box becomes a rust bucket within two seasons. We set the operator housing on a gravel bed and seal the access lid so the mechanism stays dry through Everman’s spring storms.
These systems start around $3,000 and go up from there. The price reflects not just the operator but the excavation, drainage preparation, and the electrical work required to make it run quietly for years.
Retrofit Openers on Existing Gates
If you already have a manual gate you like, a retrofit opener can often be added without replacing the gate itself. We check the post footings and hinge alignment first, because a new opener on a shifting post turns into a one-year repair cycle. In Everman, where clay movement is predictable but slow, retrofit jobs on 1960s-era gates frequently need post reinforcement before the opener goes on. That work is part of the quote, not a surprise line item.
Gate Fabrication in Everman
Gate fabrication in Everman is not a catalog order. The older lots here don’t accommodate standard pre-hung panels, so custom fabrication is often the only way to get a gate that fits the opening cleanly and clears the driveway slope. We build custom swing gates, sliding gates, and pedestrian gates to your dimensions and finish them for Texas weather. A fabricated single-swing driveway gate in Everman typically runs $2,800 to $6,500, depending on size, steel gauge, design, and whether we’re adding an operator. A simpler custom pedestrian gate starts closer to $900.
Custom Ornamental and Security Fabrication
For the high-end ornamental work around Everman, we match profiles and picket styles so a new gate doesn’t look like an alien object next to a 60-year-old brick home. That means sourcing steel in matching thicknesses, not just lookalike panels. We also fabricate security gates with reinforced frames and closer picket spacing for families who want the front yard a little less exposed.
Gates Cut and Fit for Narrow Everman Lots
Narrow driveways and tight side yards are the rule in Everman’s mid-century tracts. A gate hung too wide for the post spacing binds on the latch side within months. We cut and weld to the exact opening dimensions on site, accounting for the driveway’s cross-slope. That last part matters: on sloped driveways, a gate that clears at the hinge can scrape at the latch end if the fabricator wasn’t paying attention. We are.
Trusted Brands We Service in Everman
We’re factory-trained on the brands Everman homeowners actually run: Ghost Controls for its reliable residential sliding and swing openers, DoorKing for heavier automated systems, Elite for commercial-grade gates, and Mighty Mule for the solar and light-duty options we see on fences around town. We keep common parts for these brands available locally, which means a faster turnaround when an Everman customer needs an opener board, a remote, or a limit switch. If you’re not sure what brand you have, read the label off the motor housing and we’ll tell you exactly what we can do with it.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Everman Homes
- Cracked footings from clay movement. The expansive clay under Everman’s 1950s and 60s neighborhoods swells and contracts through wet and dry seasons. Old concrete footings crack, hinge posts shift, and the gate starts dragging or binding. We replace footings below the movement line before hanging a new gate, so it doesn’t sag in year one.
- Custom heavy gates hung on original 1960s posts. A bespoke ornamental gate might weigh three times what the original chain-link gate did. Reusing old posts rated for that lighter load is a guaranteed sag problem. We check post gauge and embedment depth before fabrication even starts.
- Underground opener corrosion. Everman’s humid summers and storm season push moisture into below-grade operator housings. If the drainage wasn’t addressed at installation, the mechanism rusts out early. We build drainage into every underground operator install.
- Wood and steel warp from heat and storms. Texas heat warps wood gates that haven’t been reinforced or properly sealed. Steel gates fare better but still need rust treatment at welds and hinges, especially in the high-humidity months. We finish everything for local conditions, not showroom conditions.
Pricing for Gate Installation in Everman, TX
Here’s what gate installation in Everman actually costs, in round numbers. A custom single swing driveway gate runs $2,800 to $6,500, depending on size and steel weight. A sliding gate starts around $3,500. A custom pedestrian gate starts at about $900. Automatic gate openers run $1,400 to $3,200 installed. Underground operators for ornamental gates start around $3,000. Keypads, loop detectors, and intercom integration add $400 to $1,200 depending on the system. Every price is written down and agreed before any work begins, so you’ll never hear a higher number after the fact. Call (682) 841-5749 for a free estimate, and we’ll measure the actual gate opening, not guess from a photo.
For a deeper look at how we approach every installation, see our Everman service area page.
We Also Serve Cities Near Everman
Our Everman crew regularly handles gate installation in the surrounding cities as well. We cover Fort Worth, Arlington, Euless, and Hurst with the same written pricing, C.A.R.E. routine, and 365-Day Done Right Promise. Dispatch and scheduling for these areas are coordinated from the brand’s Dallas-Fort Worth office, with local crews serving each city.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Everman
Everman sits on the same expansive clay formation as much of south Tarrant County, but the older 1950s and 60s tracts here have original footings that were poured shallow and without reinforcement, so they’ve had sixty-plus years of movement. In Fort Worth, many homes are newer or on graded lots with better drainage. In Everman, a new gate installation often starts with footing replacement, because hanging a heavy custom gate on cracked, shifted concrete guarantees a binding gate within the first year. Our standard process here is to pour below the clay movement line, which means digging deeper than the original builders ever did.
Usually yes, but the hinge posts have to be checked first. Those round-top picket gates from the 1960s have a lot of character, and many Everman homeowners want to keep them. The issue is that the original posts and footings were never designed for the added weight of an opener pulling the gate open hundreds of times a year. We can often reinforce the posts or replace the footings and keep the gate itself. The opener installation price starts at $1,400, and any post work is quoted separately and in writing. Call (682) 841-5749 and we’ll come measure.
On narrow Everman lots, a sliding gate or a fabricated-to-size single swing gate usually beats a standard double gate, simply because there’s not enough room for two leaves to swing without hitting a car or the house. We cut gate frames to the exact opening width and account for the driveway’s cross-slope so the gate clears the ground at both ends of its travel. Sliding gates work especially well where a swing gate would arc into the front walk or porch. We’ll tell you which option fits your lot before you spend a dollar.
The answer is footings and hinge post engineering. Everman’s clay moves seasonally, and heat and humidity work on steel over time, but a properly set post below the movement line with a solid anti-twist plate will hold a heavy gate square for decades. We also use adjustable heavy-duty hinges rated for the gate’s actual weight, not the cheapest hinge on the shelf, and we set the gate with a slight pre-load so it settles into level rather than sagging out of it. If a gate ever sags within the 365-Day Done Right Promise window, we come back and correct it, no argument.
Yes, and they work well if sized honestly. Everman gets plenty of Texas sun, but our storm season means cloudy stretches, and solar panels collect dust and pollen in the spring. A properly sized solar setup with a battery bank sized for five to seven days of weak sun will run a Mighty Mule or Ghost Controls opener without issue. A tiny panel and a single battery won’t. We’ll spec the panel and battery realistically for your gate’s cycle count and tell you the truth about what solar can and can’t do here. Call (682) 841-5749 for a free estimate with the numbers in writing.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fort Worth, serving Everman as part of the Cedarwell family since 2009.
Call (682) 841-5749 for a free gate installation estimate in Everman. You’ll get a written price before any work starts, a live person on the phone around the clock, and a crew that leaves your house as clean as they found it.