Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Pecan Acres
Gate installation in Pecan Acres starts with getting the footings right. Our crews work on custom single-family homes and ranch-style properties throughout the area, where expansive clay soil can shift enough in a single wet season to lean a heavy ornamental gate and bind its hinges. That’s why we plan every install around the soil, not just the gate. If you’re planning a new driveway gate, pedestrian gate, or full automatic opener setup, call (682) 841-5749 and we’ll walk the site with you before any price is written.
We know the long gravel drives off Bonds Ranch Road, the custom steel entries near the western edge, and the mix of acreage and newer builds that makes Pecan Acres different from a tight subdivision in Fort Worth. Our Gate Installation team brings that local knowledge to every job, and we serve the whole community from the metro dispatch office in Dallas-Fort Worth.
Why Latch and Post Gate Repair Fort Worth Is Pecan Acres’s Preferred Gate Installation Company
Homeowners in Pecan Acres tend to ask the same three questions: Will the gate hold up to clay soil movement? Will the opener handle daily use? And what happens if it’s not right? We answer all three the same way we have since 2009, as part of the Cedarwell family. A written price comes before any work starts. Shoe covers and drop cloths go down before we step inside the house. And every installation carries the 365-Day Done Right Promise. If the gate isn’t right, we make it right, without argument or fine print.
Cody Beckman leads our gate installation work, and he’s the one who makes sure every technician follows the Cedarwell C.A.R.E. routine: Clean up like it’s our own home; Ask before we move or touch anything; Respect the family’s time and quiet hours; Explain the price before the work. For families with kids napping or dogs that spook easily, that routine matters as much as the gate itself. Our quiet tools and scheduled arrival windows keep the job calm.
We’re background-checked, uniformed, and factory-trained on the brands families in Pecan Acres actually own, including Viking, Ghost Controls, and DoorKing. That training means the right setup on the first visit, not a repeat trip two months later when a cheap universal part gives out.
Styles & brands we work with
Gate Opener Installation in Pecan Acres
Gate Opener Installation across Pecan Acres almost always means automating a gate that was originally built to be swung by hand, or upgrading an operator that’s shorting out from heat and clay moisture. Older custom gates here were rarely framed with automation in mind, so the hinge posts may be sound but the operator mounting plate isn’t. We handle that with reinforced brackets and proper articulation, not by forcing a motor onto a post that’ll twist under load.
Expect to budget roughly $1,200 to $2,800 for a swing gate opener installed, including the operator, mounting reinforcement, and basic safety photocells. For a heavy ornamental gate, the upper end is more common because the post reinforcement and hinge work are not optional. You’ll see the exact number in writing before we touch anything.
Heavy-Gate Automation for Ranch Entries
When a custom ornamental gate weighs several hundred pounds and cycles ten times a day with livestock trailers coming through, the opener choice matters. We spec a gear-driven operator over a belt-drive unit for these entrances. We also set a loop detector or photocell alignment for slow-moving equipment so the gate doesn’t close on a trailer. Ranches off Peden Road and beyond get a setup built for torque, not just convenience.
Solar Openers for Rural Driveways
Some Pecan Acres properties sit far enough from the house that running AC power to the gate means trenching a quarter mile through clay. For those, a solar opener is often the better answer. A Viking or Ghost Controls solar kit with a properly sized panel and battery tray can run a single swing gate reliably, as long as the panel isn’t shaded by mature pecans. We set them back far enough to catch full sun during winter’s low angle.
Gate Fabrication in Pecan Acres
Gate Fabrication in Pecan Acres usually means a custom welded steel tube gate or ornamental iron gate sized to a specific opening, not a stock panel from a big-box aisle. Many of the ranch-style properties have 14- and 16-foot entrances on uneven ground, plus existing posts that may be worth keeping. We measure every dimension, account for swing clearance over the gravel, and build to the post centers, not to a catalog width.
A standard welded steel driveway gate for a single entrance in Pecan Acres runs $2,200 to $4,800 fabricated and installed. Ornamental iron with powder coat and more scrollwork pushes toward $5,000 to $9,000. If we’re pairing the fabrication with an opener and reinforced footings, the full project falls between $4,000 and $12,000 depending on gate width, weight, and automation requirements. Those are real ranges for this area; the written price you get before work starts is the one that holds.
Custom Ornamental Iron to Match Existing Fencing
When a home off Bonds Ranch Road already has ornamental iron fencing, a stock gate that doesn’t match looks wrong from the road. We fabricate the gate to match the fence’s bar spacing, top detail, and finish. Then we hang it on hinges rated for the full weight plus extra allowance for the clay heave that tries to shift everything out of line every spring.
Slide Gates for Long Gravel Drives
Some Pecan Acres driveways slope or run so long that a swing gate would scrape gravel or block part of the entrance when open. That’s where a sliding gate makes sense. We pour a level track pad, set the posts deep, and size the operator to the gate’s rolling weight. It costs a bit more up front, and it avoids the bind-and-drag problem entirely.
Trusted Brands We Service in Pecan Acres
We carry parts and programming support for Viking, Ghost Controls, and DoorKing models that are common on Pecan Acres gates, along with Elite where ranch-scale operators pop up. Having the brand-specific control boards and receivers in the truck means a faster job on the day of install and a faster fix if something acts up later. We don’t push universal boards into brand-name operators. It’s slower to do it right, and it’s the only way we work.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Pecan Acres Homes
- Clay heave leaning hinge posts within one season. The expansive clay around Pecan Acres swells after heavy rain and shrinks in summer, and a gate post set at the depth used in sandier Fort Worth soil will move. We dig deeper and use a wider footing with rebar to hold the post through the wet-dry cycle.
- Operator electronics shorting from direct-buried wire. Texas summer heat plus clay that holds moisture means direct-buried low-voltage wire degrades faster here. We run conduit for all new opener control wire and use heat-rated insulation.
- Drag marks on gravel drives from a sagging swing gate. A heavy gate that wasn’t corrected for post movement starts dragging the corner within months. That drag strips rack-and-pinion drives fast. We set swing clearance margins larger on Pecan Acres installs and test on a hot day, not just a cool morning.
- Photocell beams knocked out of alignment by gate flex. When a wide custom gate twists under its own weight, the safety beam at the post line drifts. We mount photocells on vibration-isolated brackets and align them after the gate has cycled a dozen times.
Pricing for Gate Installation in Pecan Acres, TX
Plan on $2,200 to $4,800 for a fabricated steel tube driveway gate, $5,000 to $9,000 for ornamental iron, and $1,200 to $2,800 for an opener added to an existing gate. If the job includes deeper post footings for clay soil, slide-gate concrete work, or solar power, the total project can reach $12,000 on the high end. A pedestrian gate alone runs $900 to $2,200. Every quote is written, itemized, and agreed before any work starts. Call (682) 841-5749 for a free estimate at your gate line.
We Also Serve Cities Near Pecan Acres
Our crews cover Pecan Acres plus Fort Worth, Arlington, Euless, and Hurst for gate installation and repair. If your property sits close to a city line, call us and we’ll confirm the route. Same Care Promise, same written pricing, wherever you are in the northwest metro.
Serving Pecan Acres, TX - Our Local Coverage Area
We’re based in the Pecan Acres area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Pecan Acres
36 to 42 inches is the minimum depth for a post carrying a full-size gate on Pecan Acres clay, with a wider footing than codes in sandier soil require. We go below the active moisture zone, because the top 24 inches of this clay expands and contracts enough to move a shallow post by a visible margin within one wet season. For heavy ornamental gates or ranch entrances with daily traffic, we also add rebar and use a larger diameter sonotube than a standard residential install calls for. Call (682) 841-5749 and we’ll check your existing post depth before you commit to any plan.
Usually, yes, but the gate needs to be reinforced first. Older custom gates in Pecan Acres often have beautiful ironwork but hinge posts and frame members that were never rated for the repetitive torque of an opener. We weld in stiffening members where needed, upgrade hinge post fastening, and then mount the operator so it doesn’t twist the frame. The automation part is straightforward; the reinforcement is what makes it last.
Yes, slides are standard work for us here. A slide gate runs on a steel track over a concrete pad, so the gravel driveway stays clear in both directions when the gate opens. We pour the pad with the right slope for drainage, set the guide rollers, and size the operator to the rolling weight. For driveways with no paved apron at all, a slide gate is often the only setup that won’t scrape or bind. Get a free site look at (682) 841-5749.
A gear-driven swing arm or a chain-drive slide operator is what we spec for ranch gates that cycle ten or twenty times a day with cattle trailers and tractors passing through. The motor and gear train in these units are built for continuous duty, unlike the lighter residential arms meant for a handful of cycles daily. We set the vehicle detection to ignore slow-moving trailers and livestock, so the gate doesn’t close on a cow or a hay rig. Call us for the exact operator match, since the wrong unit wears out in a season.
Yes, and it’s one of the more common jobs we do on the larger acreage lots. A solar panel with a deep-cycle battery tray powers a single swing gate reliably, even through North Texas summer heat, as long as the panel gets full sun and the operator is sized for the gate’s weight. We mount the panel clear of pecan tree shade and use a charge controller sized for winter’s shorter days. It’s a clean alternative to trenching power lines through clay.
If you’re planning a new gate or replacing one that’s settled out of square, call (682) 841-5749. We’ll come out to Pecan Acres, look at your soil and your current posts, and write you a price before any work begins. No surprises, no fine print, and a gate that clears its arc even after a wet spring.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fort Worth, serving Pecan Acres since 2009.