Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Everman
If your gate is sagging, dragging, or refusing to open in Everman, you’re likely dealing with what we see on nearly every older lot here: a hinge post that has shifted in the clay, a seized hinge from hard water, or a control board that simply gave up after 40 years. Most gate repairs in Everman run between $150 and $600 depending on what’s failed, and we give you the exact number in writing before any work begins. Call (682) 841-5749 and a live person will answer, day or night. We know these older Everman neighborhoods because we work in them all year, and we know which repairs hold up in this soil.
Our dispatch is coordinated from the Dallas-Fort Worth office, and our crews serve Everman locally. When you call, you’ll get a straight answer and a scheduled visit, not a voicemail promise.
Why Latch and Post Gate Repair Fort Worth Is Everman’s Preferred Gate Repair Company
We’ve been part of the Cedarwell family since 2009, and our focus has never drifted. Latch & Post exists to fix gates, install gates, and repair electric gate systems, so an Everman homeowner isn’t getting a general handyman who also happens to touch gates. You’re getting a technician who knows why a 1968 round-top picket gate leans the way it does and what to do about the footing, not just the hinge. Our background-checked, uniformed technicians operate under the Cedarwell C.A.R.E. values, so floors stay clean, questions get answered before work starts, and kids and pets aren’t startled by loud equipment when they’re asleep.
Every repair and installation carries the 365-Day Done Right Promise. If it’s not done right after we leave, Latch & Post makes it right. No fine print, no argument. That’s how independent businesses in Everman earn repeat calls from neighbors on Oak Haven Road, from the streets behind Enon Avenue, and from every pocket of this town.
Styles & brands we work with
Wood Gate Repair in Everman
Wood Gate Repair in Everman usually means one of two things: a gate that has warped out of square because of our humid summers, or a gate whose frame has pulled loose from the post as the clay soil moved beneath it. Wood gates here absorb moisture from the air and the ground, swell, then dry and shrink, and over a few seasons the diagonal brace loses its grip and the latch misses the strike by half an inch. We reset the frame, replace rotted rails where we find them, rehang the gate, and adjust the latch so the gate closes with a soft click instead of a shove.
Most wood gate repairs in Everman run from $180 to $350. You’ll see the exact figure in writing before we touch anything. And because we know this is your home, not a job site, we lay drop cloths on the floor and put on shoe covers before we step inside.
Resetting Warped Frames
When a wood gate in Everman starts scraping the driveway or swinging open on its own, the fix is usually a frame reset rather than a full replacement. We square the gate, refit the diagonal brace, and rehang it on hinges that actually move. If the wood is sound, this saves you a full rebuild.
Treating Rotted Rails and Stile Ends
Ground contact is the enemy of wooden gates along Everman’s older homes, where the bottom rail sits inches from damp clay soil. We cut out the rot, sister in new redwood or cedar where the original permits it, and reseal the cut ends so water doesn’t walk right back in.
Driveway Gate Repair in Everman
Driveway Gate Repair in Everman is a different animal from fence gate work because the gate is heavier, it’s attached to automation, and it gets used ten times a day. On the older lots here, driveway gates are often the original ornamental iron from the 60s and 70s, hung on posts that have drifted out of plumb as the clay moved. A driveway gate that scrapes the concrete or stops halfway is telling you the hinge post has shifted, the operator arm has worn, or both. We diagnose the post first, then the operator, because fixing the automation without fixing the post just burns through another motor.
Typical driveway gate repairs in Everman land between $250 and $650 depending on whether we’re resetting a post, replacing a hinge, or repairing an operator. The written price is yours before any work starts, and it never changes mid-job unless you ask us to add scope.
Hinge Post Reset and Realignment
On narrow lots off Enon Avenue and throughout Everman’s older sections, a leaning driveway gate post usually means the concrete footing under it has cracked. We cut out the old concrete, dig a deeper footing, reset the post, and let the gate swing true again. Then we check the operator isn’t working against a gate that’s fighting it.
Operator and Safety Edge Repair
When your electric driveway gate stops responding to the remote or reverses for no reason, the operator may need a new control board or the safety edges may be damaged. We stock parts for LiftMaster, Ghost Controls, DoorKing, Elite, and others, so most Everman driveways are back to closing smoothly in one visit.
Trusted Brands We Service in Everman
Our technicians are factory-trained on the brands Everman families actually have on their gates. That includes Viking and Ghost Controls for residential operators, DoorKing for the heavier driveway systems, and Elite for slide gates you’ll still find on a few older Everman properties. Because we stock local parts for these brands, most repairs happen in one trip. And if your operator is an original from the 1990s with a control board that has been obsolete for years, we’ll tell you straight whether retrofitting is worth the money or replacement is the cheaper answer.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Everman Homes
- Leaning posts from cracked footings. Everman’s 1960s-era gates were set on poured concrete footings that have cracked under decades of expansive clay movement. A leaning post here often signals a failed footing, not just a bent hinge, and the fix is a reset, not a band-aid.
- Seized hinges from hard water and humidity. Steel gates in Everman take a beating from humid air and hard water, especially around the hinge post and lower rail. Hinges seize up, panels lock, and the gate groans instead of swinging.
- Sagging swing gates from clay soil movement. Expansive clay swells when wet and shrinks when dry, twisting gate frames so the latch no longer meets the strike. Each season can move a gate frame a quarter inch, and over a few years that’s enough to stop it latching at all.
- Obsolete control boards on old operators. Many Everman homes still run operators from the 1990s and early 2000s. Control boards fail, and some aren’t made anymore. We can often retrofit a modern board, but we’ll tell you honestly if a new operator is the smarter spend.
Pricing for Gate Repair in Everman, TX
Gate repair prices in Everman are set by what actually failed, and we give you the number in writing before we touch anything. A standard hinge replacement runs $150 to $280. A post reset with a new concrete footing runs $300 to $550. Wood gate frame resets run $180 to $350. Driveway gate operator repairs usually fall between $250 and $650. Full electric gate operator replacement on an existing post starts around $800 and goes up with gate weight and safety requirements. The price we quote is the price you pay, agreed before work starts. Call (682) 841-5749 for a free estimate.
We Also Serve Cities Near Everman
Our Gate Repair crews work throughout the southern DFW metro, including Fort Worth, Arlington, Euless, and Hurst. If you’re just outside Everman, or you have family on the edge of town, we’ll come to you with the same written price and the same care routine. See our Everman page for local specifics.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Everman
Look at the base of the post where it meets the concrete. In Everman’s older neighborhoods, if you see a crack running through the footing pad or the post has pulled visibly out of plumb at ground level, the footing is likely the culprit. A bent hinge leans the gate at the hinge knuckle; a failed footing moves the whole post. On a narrow lot off Enon Avenue, our tech found a 1968 round-top picket swing gate with a seized hinge post and a cracked footing: the post had pulled 4 inches out of plumb. We cut out the old concrete, reset the hinge post with a deeper footing, and fitted a new LiftMaster gate operator with a safety photocell, bringing the original gate back to smooth operation. Call (682) 841-5749 and we’ll diagnose it in person.
In most cases you can keep it, and we’d rather you do. Those round-top picket gates were built from thicker steel than most modern panels, and if the post is sound and the rails aren’t rusted through, a reset with a new footing is almost always cheaper than a full replacement. Replacement becomes the smarter spend when the frame is rusted through in multiple places or the lower rail is paper-thin. We’ll show you the numbers side by side before you decide. Call (682) 841-5749 for an honest assessment.
Usually yes. Modern operators from LiftMaster and Ghost Controls mount to existing steel or wood gates without major modification, as long as the posts are plumb and the gate swings freely. On older round-top pickets with cracked footings, we often reset the post first, then install the operator with a safety photocell, because an automation system can’t compensate for a gate that’s already out of square. Call (682) 841-5749 and we’ll tell you whether your gate is automation-ready.
Paint seals the surface, but it doesn’t stop moisture from moving in and out of the end grain and the bottom rail. Everman’s humid summers add humidity to the air, and the clay soil holds moisture against the bottom of the gate for days after rain. That uneven swelling warps the frame and pulls the diagonal brace loose. We address the cause rather than just the symptom by improving drainage under the gate, resealing cut ends, and sometimes rebuilding the frame with properly kiln-dried stock. Call (682) 841-5749 and we’ll tell you what’s salvageable.
Once a year is the honest answer, especially for gates on expansive clay soil that moves with every wet-dry cycle. During a yearly service, we check the post alignment, lubricate hinges with pet-safe products where there’s a choice, test the safety edges and photocells, and tighten the operator arm. It’s cheaper than waiting for a failure, and it keeps the gate closing safely on kids, pets, and cars. Estimates are free, and a live person answers 24/7 at (682) 841-5749.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Fort Worth, serving Everman since 2009.